tankdriver Posted November 27, 2015 Share Posted November 27, 2015 Well, I ordered a floor kit from John for my WC63, and he tells me it is in...... So I pulled out the Chip board some body had put in it, And low and behold....... there IS a floor in it.....:shocked: well kinda........:-) So now the work starts..... Quote Link to comment Share on other sites More sharing options...
Tony B Posted November 27, 2015 Share Posted November 27, 2015 STOP!! You probably have woodworm and types of rot never before seen by science in tha lot! :-D Quote Link to comment Share on other sites More sharing options...
Chris Suslowicz Posted November 27, 2015 Share Posted November 27, 2015 STOP!! You probably have woodworm and types of rot never before seen by science in tha lot! :-D As long as the woodworm haven't interbred with the tinworm it's probably reasonably safe to handle. Keep it away from anything like a Morris Traveller though or you might get an outbreak of vehiculus eateruppus that will need a flamethrower to eliminate. :-D Quote Link to comment Share on other sites More sharing options...
Tony B Posted November 27, 2015 Share Posted November 27, 2015 On the flame thrower side. Do remeebr to take oil soaked carpets out from under a vehicle before welding, and no it wern't me! Quote Link to comment Share on other sites More sharing options...
tankdriver Posted November 29, 2015 Author Share Posted November 29, 2015 I should have checked before I ordered the full kit. But as it was really soft and spongey in a couple areas, it felt like it was going to break thorough when you walk on it. So I thought there was nothing under the chip board. I did not pull it apart to check it out as I wanted to use it for Vet's Day. I was SURE I was right........ I ordered the kit for it about the 1st of Nov, as John told me that it would take 10 days to get it made, and I wanted to get it here as soon as possible after the last event of the year. Well it least I know I'll have everything need to replace it...... Gordon brought up a good point on to pull the gas tank and clean it while I have everything apart. So' Ill probably do that. Quote Link to comment Share on other sites More sharing options...
tankdriver Posted January 2, 2016 Author Share Posted January 2, 2016 Well, I got the floor pulled out all the way. and the frame cleaned up. Found out I have one bed support rusted out. Here's some photos..... I think this needs to be replaced..... Well onward and upward....... Quote Link to comment Share on other sites More sharing options...
Enigma Posted January 2, 2016 Share Posted January 2, 2016 Don't forget to have a hole in the wood for acces to the fueltank sender unit. We had it missing and it was a drama to get a plank out to replace the seal on the sender unit/fueltank. Quote Link to comment Share on other sites More sharing options...
tankdriver Posted January 2, 2016 Author Share Posted January 2, 2016 Thanks for the heads up........ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.