70HONEYMONSTER Posted March 17, 2014 Share Posted March 17, 2014 Can anyone give me the size and position of the rear windows on the back panel of the cab please? Quote Link to comment Share on other sites More sharing options...
ace1 Posted March 17, 2014 Share Posted March 17, 2014 Hi Mate, have a look at "Sparky lives again" page 3 post 48, but there doesn't seem to be a standard pattern, there are other restoration blogs with different sizes and positions also most are covered by the back body. I guess you need to put them so you can see out. Hope to see you at Dorset again this year. Alan. Quote Link to comment Share on other sites More sharing options...
ruggyjohn Posted March 17, 2014 Share Posted March 17, 2014 Just restoring my cab, the one behind the driver which slides open is larger than the other 3 which on mine are all the same size, will measure them tomorrow when I am in the workshop. Quote Link to comment Share on other sites More sharing options...
70HONEYMONSTER Posted March 17, 2014 Author Share Posted March 17, 2014 Cheers , that would be great. Quote Link to comment Share on other sites More sharing options...
ruggyjohn Posted April 3, 2014 Share Posted April 3, 2014 Sorry for the delay, been very busy with work, the measurements are 300mm x210mm for all 3. The glass is wired and is still available not a perfect match but very close. Quote Link to comment Share on other sites More sharing options...
70HONEYMONSTER Posted April 4, 2014 Author Share Posted April 4, 2014 Thanks for that. Have you had much to do to the cab? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.