starlads Posted August 2, 2012 Share Posted August 2, 2012 I am restoring a Matador that has the early air over hydraulic Westinghouse system which I would like to keep original. I need to replace the brake master cylinder due to water damage. It is a Lockheed APco stamped RJB Eng part no 9-16080/4 or the repair kit and I will sleeve it. I also need a rubber seal for a Westinghouse servo, a rubber dump valve. 11/2" diameter 3/4" hole cup washer. Regards Richard Poole 07808 056044 Quote Link to comment Share on other sites More sharing options...
flywheel Posted August 2, 2012 Share Posted August 2, 2012 Hi Richard welcom to the forum, Heather and myself called in at your dads on sunday to see your Matador, looks really good. Hopefully you will be able to find the parts and gain some info from the very knowledgeable people on this site to get her finished. Quote Link to comment Share on other sites More sharing options...
private mw Posted August 3, 2012 Share Posted August 3, 2012 hi welcome to the forum Quote Link to comment Share on other sites More sharing options...
stevenivers Posted August 4, 2012 Share Posted August 4, 2012 Welcome aboard :cheesy: Quote Link to comment Share on other sites More sharing options...
RattlesnakeBob Posted August 4, 2012 Share Posted August 4, 2012 AEC Matador hey? very nice...wish I had a the room for one :cheesy:welcome in by the way :-D Quote Link to comment Share on other sites More sharing options...
starlads Posted September 3, 2012 Author Share Posted September 3, 2012 We now have air over hydraulic brakes that work! EUREKA..... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.