robin craig Posted September 12, 2010 Share Posted September 12, 2010 Here is the making of a pair of brackets that holds the front of the fan assembly to the engine block. You can see that we were sold a vehicle with two parts of the same hand, one being bodged in an attempt to make it fit. I elected to keep the correct original one in our parts inventory and make a matching pair of replacement brackets. I seem to be missing the last photo which shows the finished bracket. I welded on a piece of round bar stock over the hole on the bracket, cut it to length and then drilled through it to finish the fabrication. R Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.