Leon Hassing Posted July 18, 2021 Share Posted July 18, 2021 (edited) Dear wel informed gentlemen, I am building an 1:35 scale model of this trailer. I am looking for info on the pump gear on this trailer. Is there anybody who can help me? Hope to hear from you All the best Leon Edited July 18, 2021 by Leon Hassing Quote Link to comment Share on other sites More sharing options...
STUNTMAN Posted November 2, 2021 Share Posted November 2, 2021 Hi,I've just seen your post,I have 2 actual pumps for these Bowser's,is that of any use? What are you after, pictures? Andrew Quote Link to comment Share on other sites More sharing options...
Leon Hassing Posted November 3, 2021 Author Share Posted November 3, 2021 Hello Andrew, Thanks for your reply. Yes I am looking for pictures of the pump. I have since found a u-tube film with this trailer where the pump can be seen working, but I would like to have some more details of the pump and of the parts between the flywheels. Hope you can help. Thanks in advance and all the best Leon Quote Link to comment Share on other sites More sharing options...
STUNTMAN Posted November 3, 2021 Share Posted November 3, 2021 I've one of mine in bits as I've had it sandblasted so if u need any separate parts photographing then let me know. Regards. Andrew 1 Quote Link to comment Share on other sites More sharing options...
Leon Hassing Posted November 3, 2021 Author Share Posted November 3, 2021 Hello Andrew, Please pictures of the parts between the flywheels would be great. Maybe if possible some pictures of the whole setup would be perfect. Thanks in advance All the best Leon Quote Link to comment Share on other sites More sharing options...
STUNTMAN Posted November 4, 2021 Share Posted November 4, 2021 On 11/3/2021 at 12:14 AM, Leon Hassing said: Hello Andrew, Thanks for your reply. Yes I am looking for pictures of the pump. I have since found a u-tube film with this trailer where the pump can be seen working, but I would like to have some more details of the pump and of the parts between the flywheels. Hope you can help. Thanks in advance and all the best Leon Is it a zwicky type pump as you've a different setup in the pic from mine,I've a Lister A that drives mine,I will do afew snaps mayb tommow (Fri) or over weekend n see if it's same as yours...shud be,ok will get back to u soon as I've a min,Andrew Quote Link to comment Share on other sites More sharing options...
Leon Hassing Posted November 9, 2021 Author Share Posted November 9, 2021 Thanks Andrew that would be great. I am a bit confused, Is Zwicky the maker of the pump or of the engine that drives it ? Or is it all from the same maker ? Same For Lister ? Looking forward to the pictures. All the best Leon Quote Link to comment Share on other sites More sharing options...
STUNTMAN Posted November 9, 2021 Share Posted November 9, 2021 Zwicky made the pumps n the engines were Lister A's. Will do pics prob this Sunday then if u want detail of a certain item then let me know as one pump is in primered bits to resemble. Quote Link to comment Share on other sites More sharing options...
Leon Hassing Posted November 9, 2021 Author Share Posted November 9, 2021 That's perfect Andrew. Thanks again Quote Link to comment Share on other sites More sharing options...
Leon Hassing Posted November 17, 2021 Author Share Posted November 17, 2021 Hello Andrew, Any luck with the pictures? Quote Link to comment Share on other sites More sharing options...
STUNTMAN Posted November 17, 2021 Share Posted November 17, 2021 Hi,sorry didn't get time last weekend but I've put it in my diary to remind me to do this Saturday,I will message u when I've done them. Thanks. Andrew Quote Link to comment Share on other sites More sharing options...
STUNTMAN Posted November 20, 2021 Share Posted November 20, 2021 hi Leon here's afew pics for starters,will try n do complete one I've in storage later,not sure which bit Ur wanting specifically but see if these any good. Regards Andrew. Ifu need a word my number is 07709 927324 1 1 Quote Link to comment Share on other sites More sharing options...
Leon Hassing Posted November 20, 2021 Author Share Posted November 20, 2021 Helle Andrew, This is brilliant!! These pictures are of great help. Also a picture of the complete set up would be great. Do you know if the pale bleu color on the part in the last picture is original? Thanks soo much for these. All the best Leon Quote Link to comment Share on other sites More sharing options...
STUNTMAN Posted November 20, 2021 Share Posted November 20, 2021 The parts have been sandblasted so just primed,the main body pic is just blasted but not painted as I was going to leave it bare metal but changed my mind since,have a look on my page on forum as I think I've pics if it in bowser from few years back if u go thru them all.. Quote Link to comment Share on other sites More sharing options...
STUNTMAN Posted November 20, 2021 Share Posted November 20, 2021 1 Quote Link to comment Share on other sites More sharing options...
STUNTMAN Posted November 20, 2021 Share Posted November 20, 2021 1 hour ago, Leon Hassing said: Helle Andrew, This is brilliant!! These pictures are of great help. Also a picture of the complete set up would be great. Do you know if the pale bleu color on the part in the last picture is original? Thanks soo much for these. All the best Leon If u want better detail I can drag it out from were it is to get better pics as I know their abit vague. Quote Link to comment Share on other sites More sharing options...
Leon Hassing Posted November 20, 2021 Author Share Posted November 20, 2021 I have found the pictures on your earlier topic. Also pictures of the listerA engine where on there. Together with the detail pictures of the separate parts I think I have all the info I need now to build this. Thanks very much for your help, it is really appreciated. All the best Leon Quote Link to comment Share on other sites More sharing options...
STUNTMAN Posted November 20, 2021 Share Posted November 20, 2021 No probs just remembered I have instruction books if theirs drawings will post,glad to help would like to see pucwen it's done? Andrew Quote Link to comment Share on other sites More sharing options...
STUNTMAN Posted November 23, 2021 Share Posted November 23, 2021 1 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.