The Governor Posted June 19, 2017 Posted June 19, 2017 Hi all, on either side passing through the chassis which supports the decking to stand on whilst operating the crane, there are two rods as shown in the picture, one either side. What is their job ? The Governor. Quote
scott9643 Posted June 19, 2017 Posted June 19, 2017 Hi all, on either side passing through the chassis which supports the decking to stand on whilst operating the crane, there are two rods as shown in the picture, one either side. What is their job ? The Governor. Looks like the rods that stop the gun planks from sliding out, they've generally got a turn buckle in the end to keep them there Quote
The Governor Posted June 19, 2017 Author Posted June 19, 2017 Thanks for the reply. The turn buckle is on the right in the photo. These "gun planks", are they similar to the planks that are stored above the rear wheels beneath the deck? The Governor. Quote
scott9643 Posted June 19, 2017 Posted June 19, 2017 Thanks for the reply. The turn buckle is on the right in the photo.These "gun planks", are they similar to the planks that are stored above the rear wheels beneath the deck? The Governor. Yes, it's the same bit of kit, four carried on the Scammell, two across the body retained by those rods, and one along each side as you describe. Quote
The Governor Posted June 19, 2017 Author Posted June 19, 2017 Thanks for that. I had some timber 13 foot long 3 inches wide, I have made two out of it, so will have to look out for some more. The Governor. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.