TrueS2 Posted August 10, 2015 Share Posted August 10, 2015 Gents, I am preparing to remanufacture the loom for the BGS Landrover, which is technically based on a Rover 8 but has a different loom. As the one in my base vehicle was altered in many ways, I need to produce a brand new one. I do have a wiring diagramm and a sketch from the parts manual, plus some pictures and a rough idea what goes where. But - as usual there is a but.... What diemeter cables did they use and what type of cables? The early 40amp/24V generator (CAV 724/1) will be installed, complete with the selenium plate rectifier. Is there anybody with a genuine/unmodified wiring loom "to hands" who could measure some of the wire diemeters for me? regards TrueS2 Quote Link to comment Share on other sites More sharing options...
Ivor Ramsden Posted August 11, 2015 Share Posted August 11, 2015 What's the part number for the harness? I've got a couple of new ones which look like FFR ones but I don't have a parts book for the Mk8 24V so I can't identify them. If one of them is correct I'll gladly measure it for you. Quote Link to comment Share on other sites More sharing options...
fv1609 Posted August 11, 2015 Share Posted August 11, 2015 What's the part number for the harness? These are for the main harness, the type depends on the contract. Rover 541624 Lucas 54931056 Rover 529992 Lucas 54930156 Quote Link to comment Share on other sites More sharing options...
Ivor Ramsden Posted August 13, 2015 Share Posted August 13, 2015 Thanks Clive. I don't have those. Can you identify mark numbers for any of these below? Rover 519908 LU54948833 I've got this as Rover 8 24V engine harness. Rover 531595 Chassis harness LU821482 LU820761 LU822024 engine harness They all look like Land-Rover harnesses but I don't have much in the way of Series 2 parts books; Series 1s are my area. Quote Link to comment Share on other sites More sharing options...
TrueS2 Posted August 18, 2015 Author Share Posted August 18, 2015 Hi Ivor, the BGS wiring loom would be part number 551163. Any chance of some pics from the looms? Do they have the 6 way ligtning switch connections? regards and many thanks TrueS2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.