Sean N Posted September 10, 2014 Share Posted September 10, 2014 I've had this knocking around for ages; it came with a K9 but I can't see anything on the K9 it would fit. It's in three main parts, an aluminium aerial mount and two large ceramic insulators. The insulators presumably fit either side of the panel it would be mounted to. The parts are separated by copper washers. Quote Link to comment Share on other sites More sharing options...
Chris Suslowicz Posted September 10, 2014 Share Posted September 10, 2014 Well, it's HF and remarkably substantial. I suspect it's the Larkspur-era replacement for Aerial Base No.16 and the vehicle was originally fitted for a D11 or D13 transmitter and R230 or the later R234 receiver. Chris The Aerial Base No.16 was a mashup of Aerial Base No.3 and a Insulator W/T "H", used with the WS19HP up to the WS53. Base No.3 took the 34-ft steel mast sections, and the Insulator W/T was a big ceramic mushroom type. Because of the voltages involved, the No.3 base was fitted to a metal disk on top of the ceramic insulator and the rubber part was bypassed by four copper braid straps - otherwise it was likely to catch fire. Quote Link to comment Share on other sites More sharing options...
Sean N Posted September 10, 2014 Author Share Posted September 10, 2014 Chris, thanks. The truck it was out of was FFW SRD11/R234. I'm afraid not knowing anything about radios the second part of your comment is fairly meaningless to me though! Would this have been part of a separate aerial assembly guyed to the ground, rather than mounted on the vehicle? Quote Link to comment Share on other sites More sharing options...
Chris Suslowicz Posted September 10, 2014 Share Posted September 10, 2014 Chris, thanks. The truck it was out of was FFW SRD11/R234. I'm afraid not knowing anything about radios the second part of your comment is fairly meaningless to me though! Would this have been part of a separate aerial assembly guyed to the ground, rather than mounted on the vehicle? No, it's a "through the roof" truck mount. I seem to recall there was a metal "V" shaped protector in front of the base to prevent it being damaged by low branches when on the move - but that would be considered part of the radio cabin. You can see the tip of the aerial in this picture, most of the base is obscured by the "coffin" storage box that holds the side tent when not in use. Chris. Quote Link to comment Share on other sites More sharing options...
Sean N Posted September 10, 2014 Author Share Posted September 10, 2014 I think I may be forgetting. From the design I thought it should clearly be a through the roof (or through a piece of plate) mount, with the two parts of the ceramic insulator clamping either side of the panel. I couldn't recall anything on a K9 roof that it could fit through, and there certainly isn't anything on the two I still have. On a K9 there is however an aperture front and centre of the roof with a steel plate over, which has a Vent-Axia fan in. Thinking about it I have a feeling on the SR D11/R234 box this plate also has an aperture that this mount would fit through. It's all coming back to me now... Quote Link to comment Share on other sites More sharing options...
Chris Suslowicz Posted September 10, 2014 Share Posted September 10, 2014 I think I may be forgetting. From the design I thought it should clearly be a through the roof (or through a piece of plate) mount, with the two parts of the ceramic insulator clamping either side of the panel. I couldn't recall anything on a K9 roof that it could fit through, and there certainly isn't anything on the two I still have. On a K9 there is however an aperture front and centre of the roof with a steel plate over, which has a Vent-Axia fan in. Thinking about it I have a feeling on the SR D11/R234 box this plate also has an aperture that this mount would fit through. It's all coming back to me now... The mount is further forward that the Vent-Axia, because it's directly over the aerial tuning unit and there was a glass "bowl" insulator between the top of the ATU and the roof. (You don't want to get any body parts close to the feeder with 250 watts of RF on it, I can assure you.) A lot of K9s may have been converted to radio relay roles, with C50/R236 (and C70s) fitted. These would have had the insulators removed (as well as the "coffin") and a Clark 12M pump up mast fitted. Chris. Quote Link to comment Share on other sites More sharing options...
Sean N Posted November 22, 2015 Author Share Posted November 22, 2015 Chris, you have a PM. Quote Link to comment Share on other sites More sharing options...
scott9643 Posted November 29, 2015 Share Posted November 29, 2015 The mount is further forward that the Vent-Axia, because it's directly over the aerial tuning unit and there was a glass "bowl" insulator between the top of the ATU and the roof. (You don't want to get any body parts close to the feeder with 250 watts of RF on it, I can assure you.) A lot of K9s may have been converted to radio relay roles, with C50/R236 (and C70s) fitted. These would have had the insulators removed (as well as the "coffin") and a Clark 12M pump up mast fitted. Chris. This page from the D11/R Installation EMER explains all ............... Malcolm~[ATTACH]110496[/ATTACH~[ATTACH]110496[/ATTACH 3914_EMER_CI_Q115_AerialInstallation_SR_D11_R230_Austin_K9.pdf Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.