Saracen air pump line routing....

[Cold_War_Collection]

Silly me...

I took pictures of almost everything in the rebuild of the saracen, expect for details of the lines that come off the hyd./ air pump. anyone have a good picture or can explain where the lines go?

 

in particular, the two fittings on the top of the compressor (where do those lines go to and detail of the "in" line on the front of the Hyd. pump?

 

many thanks

 

Nick

[Starfire]

I'll try and take some pictures tomorrow.

 

Cheers,

Terry

[Cold_War_Collection]

I'll try and take some pictures tomorrow.

 

Cheers,

Terry

 

Great!

 

Thanks

[Starfire]

I've come down with a pretty bad cold and therefore wasn't really up for crawling on top of the Saracen and taking some pictures over the weekend. If you haven't got them already, here are some extracts from the User Handbook. Also, forum member Oily has some photos on his Facebook account of when he did an engine swap, if you need more info, let me know and I'll get his permission to reproduce them here.

 

Pump Assembly

 

[TABLE=class: grid, width: 700]

[TR]

[TD]1

[/TD]

[TD]Handle bracket - tyre pump

[/TD]

[TD]22

[/TD]

[TD]Pivot arm - tyre pump end

[/TD]

[/TR]

[TR]

[TD]2

[/TD]

[TD]Spring - tyre pump

[/TD]

[TD]23

[/TD]

[TD]Oil drain pipe - tyre pump

[/TD]

[/TR]

[TR]

[TD]3

[/TD]

[TD]Control lever - engaging tyre pump

[/TD]

[TD]24

[/TD]

[TD]Oil drain cap

[/TD]

[/TR]

[TR]

[TD]4

[/TD]

[TD]Oil filter plug - tyre pump

[/TD]

[TD]25

[/TD]

[TD]Pivot arm tube

[/TD]

[/TR]

[TR]

[TD]5

[/TD]

[TD]Adaptor - oil filler pipe

[/TD]

[TD]26

[/TD]

[TD]Pump drive body

[/TD]

[/TR]

[TR]

[TD]6

[/TD]

[TD]Oil filler pipe - tyre pump

[/TD]

[TD]27

[/TD]

[TD]Pivot arm - drive end

[/TD]

[/TR]

[TR]

[TD]7

[/TD]

[TD]Hose clip

[/TD]

[TD]28

[/TD]

[TD]Pulley

[/TD]

[/TR]

[TR]

[TD]8

[/TD]

[TD]Flexible control - tyre pump engagement

[/TD]

[TD]29

[/TD]

[TD]Bearing housing - rear

[/TD]

[/TR]

[TR]

[TD]9

[/TD]

[TD]Radius arm lug

[/TD]

[TD]30

[/TD]

[TD]Pipe - fluid supply to pump

[/TD]

[/TR]

[TR]

[TD]10

[/TD]

[TD]Radius arms - adjuster

[/TD]

[TD]31

[/TD]

[TD]Hydraulic fluid pump

[/TD]

[/TR]

[TR]

[TD]11

[/TD]

[TD]Trunnion pin

[/TD]

[TD]32

[/TD]

[TD]Pipe - fluid delivery

[/TD]

[/TR]

[TR]

[TD]12

[/TD]

[TD]Pivot bracket - adjuster screw

[/TD]

[TD]33

[/TD]

[TD]Trunnion - adjuster

[/TD]

[/TR]

[TR]

[TD]13

[/TD]

[TD]Adjuster screw

[/TD]

[TD]34

[/TD]

[TD]Nut - locking adjuster

[/TD]

[/TR]

[TR]

[TD]14

[/TD]

[TD]Nut - adjuster screw

[/TD]

[TD]35

[/TD]

[TD]Radius arms - adjuster

[/TD]

[/TR]

[TR]

[TD]15

[/TD]

[TD]Nut - locking adjuster screw

[/TD]

[TD]36

[/TD]

[TD]Adjuster screw

[/TD]

[/TR]

[TR]

[TD]16

[/TD]

[TD]Split pin

[/TD]

[TD]37

[/TD]

[TD]Pivot bracket - adjuster screw

[/TD]

[/TR]

[TR]

[TD]17

[/TD]

[TD]Pulley bracket

[/TD]

[TD]38

[/TD]

[TD]Pulley bracket

[/TD]

[/TR]

[TR]

[TD]18

[/TD]

[TD]Connection - tyre pump to filter

[/TD]

[TD]39

[/TD]

[TD]Radius arms - adjuster

[/TD]

[/TR]

[TR]

[TD]19

[/TD]

[TD]Air intake pipe

[/TD]

[TD]40

[/TD]

[TD]Radius arm lug

[/TD]

[/TR]

[TR]

[TD]20

[/TD]

[TD]Pivot plate - tyre pump

[/TD]

[TD]41

[/TD]

[TD]Adjuster nut

[/TD]

[/TR]

[TR]

[TD]21

[/TD]

[TD]Tyre pump

[/TD]

[TD][/TD]

[TD][/TD]

[/TR]

[/TABLE]

 

Filter Assembly (Later Type)

 

[TABLE=class: grid, width: 700]

[TR]

[TD]1

[/TD]

[TD]Dust cap

[/TD]

[TD]7

[/TD]

[TD]Seal ring

[/TD]

[/TR]

[TR]

[TD]2

[/TD]

[TD]Air host connection

[/TD]

[TD]8

[/TD]

[TD]Filter element assembly

[/TD]

[/TR]

[TR]

[TD]3

[/TD]

[TD]Outlet elbow

[/TD]

[TD]9

[/TD]

[TD]Drain valve

[/TD]

[/TR]

[TR]

[TD]4

[/TD]

[TD]Filter head

[/TD]

[TD]10

[/TD]

[TD]Bowl

[/TD]

[/TR]

[TR]

[TD]5

[/TD]

[TD]Inlet adapter

[/TD]

[TD]11

[/TD]

[TD]Clamping ring

[/TD]

[/TR]

[TR]

[TD]6

[/TD]

[TD]Pressure pipe

[/TD]

[TD]12

[/TD]

[TD]Clamping ring hut

[/TD]

[/TR]

[/TABLE]

 

Cheers,

Terry

[Cold_War_Collection]

I've come down with a pretty bad cold and therefore wasn't really up for crawling on top of the Saracen and taking some pictures over the weekend. If you haven't got them already, here are some extracts from the User Handbook. Also, forum member Oily has some photos on his Facebook account of when he did an engine swap, if you need more info, let me know and I'll get his permission to reproduce them here.

 

Pump Assembly

 

[ATTACH=CONFIG]92102[/ATTACH]

[TABLE=class: grid, width: 700]

[TR]

[TD]1

[/TD]

[TD]Handle bracket - tyre pump

[/TD]

[TD]22

[/TD]

[TD]Pivot arm - tyre pump end

[/TD]

[/TR]

[TR]

[TD]2

[/TD]

[TD]Spring - tyre pump

[/TD]

[TD]23

[/TD]

[TD]Oil drain pipe - tyre pump

[/TD]

[/TR]

[TR]

[TD]3

[/TD]

[TD]Control lever - engaging tyre pump

[/TD]

[TD]24

[/TD]

[TD]Oil drain cap

[/TD]

[/TR]

[TR]

[TD]4

[/TD]

[TD]Oil filter plug - tyre pump

[/TD]

[TD]25

[/TD]

[TD]Pivot arm tube

[/TD]

[/TR]

[TR]

[TD]5

[/TD]

[TD]Adaptor - oil filler pipe

[/TD]

[TD]26

[/TD]

[TD]Pump drive body

[/TD]

[/TR]

[TR]

[TD]6

[/TD]

[TD]Oil filler pipe - tyre pump

[/TD]

[TD]27

[/TD]

[TD]Pivot arm - drive end

[/TD]

[/TR]

[TR]

[TD]7

[/TD]

[TD]Hose clip

[/TD]

[TD]28

[/TD]

[TD]Pulley

[/TD]

[/TR]

[TR]

[TD]8

[/TD]

[TD]Flexible control - tyre pump engagement

[/TD]

[TD]29

[/TD]

[TD]Bearing housing - rear

[/TD]

[/TR]

[TR]

[TD]9

[/TD]

[TD]Radius arm lug

[/TD]

[TD]30

[/TD]

[TD]Pipe - fluid supply to pump

[/TD]

[/TR]

[TR]

[TD]10

[/TD]

[TD]Radius arms - adjuster

[/TD]

[TD]31

[/TD]

[TD]Hydraulic fluid pump

[/TD]

[/TR]

[TR]

[TD]11

[/TD]

[TD]Trunnion pin

[/TD]

[TD]32

[/TD]

[TD]Pipe - fluid delivery

[/TD]

[/TR]

[TR]

[TD]12

[/TD]

[TD]Pivot bracket - adjuster screw

[/TD]

[TD]33

[/TD]

[TD]Trunnion - adjuster

[/TD]

[/TR]

[TR]

[TD]13

[/TD]

[TD]Adjuster screw

[/TD]

[TD]34

[/TD]

[TD]Nut - locking adjuster

[/TD]

[/TR]

[TR]

[TD]14

[/TD]

[TD]Nut - adjuster screw

[/TD]

[TD]35

[/TD]

[TD]Radius arms - adjuster

[/TD]

[/TR]

[TR]

[TD]15

[/TD]

[TD]Nut - locking adjuster screw

[/TD]

[TD]36

[/TD]

[TD]Adjuster screw

[/TD]

[/TR]

[TR]

[TD]16

[/TD]

[TD]Split pin

[/TD]

[TD]37

[/TD]

[TD]Pivot bracket - adjuster screw

[/TD]

[/TR]

[TR]

[TD]17

[/TD]

[TD]Pulley bracket

[/TD]

[TD]38

[/TD]

[TD]Pulley bracket

[/TD]

[/TR]

[TR]

[TD]18

[/TD]

[TD]Connection - tyre pump to filter

[/TD]

[TD]39

[/TD]

[TD]Radius arms - adjuster

[/TD]

[/TR]

[TR]

[TD]19

[/TD]

[TD]Air intake pipe

[/TD]

[TD]40

[/TD]

[TD]Radius arm lug

[/TD]

[/TR]

[TR]

[TD]20

[/TD]

[TD]Pivot plate - tyre pump

[/TD]

[TD]41

[/TD]

[TD]Adjuster nut

[/TD]

[/TR]

[TR]

[TD]21

[/TD]

[TD]Tyre pump

[/TD]

[TD][/TD]

[TD][/TD]

[/TR]

[/TABLE]

 

Filter Assembly (Later Type)

 

[ATTACH=CONFIG]92103[/ATTACH]

[TABLE=class: grid, width: 700]

[TR]

[TD]1

[/TD]

[TD]Dust cap

[/TD]

[TD]7

[/TD]

[TD]Seal ring

[/TD]

[/TR]

[TR]

[TD]2

[/TD]

[TD]Air host connection

[/TD]

[TD]8

[/TD]

[TD]Filter element assembly

[/TD]

[/TR]

[TR]

[TD]3

[/TD]

[TD]Outlet elbow

[/TD]

[TD]9

[/TD]

[TD]Drain valve

[/TD]

[/TR]

[TR]

[TD]4

[/TD]

[TD]Filter head

[/TD]

[TD]10

[/TD]

[TD]Bowl

[/TD]

[/TR]

[TR]

[TD]5

[/TD]

[TD]Inlet adapter

[/TD]

[TD]11

[/TD]

[TD]Clamping ring

[/TD]

[/TR]

[TR]

[TD]6

[/TD]

[TD]Pressure pipe

[/TD]

[TD]12

[/TD]

[TD]Clamping ring hut

[/TD]

[/TR]

[/TABLE]

 

Cheers,

Terry

 

Perfect,

 

that cover 99% of it!! There is a fitting for an oil line that is 180 degrees or so opposite the oil drain line fitting, do you know what feeds into that?

 

many thanks

 

Nick

[Starfire]

That would be the fill pipe, I would think.

 

Cheers,

Terry