question Does anyone have drawing for a Bedford MW body?

[James Shopland]

Yet another project: We need the drawings for a 15cwt Bedford body. We have a tail board and head board but the bit in the middle is to say the least, vague. Any help with drawing, measurement or even an old body would be appreciated. Best regards, James.

[mcspool]

Hello James,

 

Good to "see" you on here again, we met in Normandy back in 2009.

 

Mike Kelly in Australia used to have a website with 15-cwt body drawings, sadly the site is gone but luckily it was been cached in the Internet Archive - see http://web.archive.org/web/20091027102342/http://www.geocities.com/vk3cz/GSBody.html

 

Hope this helps,

Hanno

[James Shopland]

Hello James,

 

Good to "see" you on here again, we met in Normandy back in 2009.

 

Mike Kelly in Australia used to have a website with 15-cwt body drawings, sadly the site is gone but luckily it was been cached in the Internet Archive - see http://web.archive.org/web/20091027102342/http://www.geocities.com/vk3cz/GSBody.html

 

Hope this helps,

Hanno

 

 

Thanks Hanno that is marvelous. I will let you know how we get on. Best etc.. James.