riverman Posted May 16, 2010 Share Posted May 16, 2010 With a bit of luck and a following wind, I will have all of the front panels on my 44 GMC CCKW shot blasted and painted in the next couple of weeks ( with the exception of the step throughs which will need some welding in the traditional floor level place. Next job is reassembly and I would be really grateful if someone could point me in the direction of anti squeak strip as the stuff that came off when I took the cab to bits was well past it and crumbled to dust in my hand. Standing by............ Quote Link to comment Share on other sites More sharing options...
N.O.S. Posted May 16, 2010 Share Posted May 16, 2010 Check out Rcubed's recent thread on rebuilding his 352 cab -a couple of sources mentioned on there, he got his from Allied Forces. Quote Link to comment Share on other sites More sharing options...
R Cubed Posted May 18, 2010 Share Posted May 18, 2010 Depends what bits you are on about I was lucky enough to get a good strip of the bonnet rubbing stuff from Dallas Autos, the other was a custom job by Allied Forces, see above thread for pics Quote Link to comment Share on other sites More sharing options...
riverman Posted May 20, 2010 Author Share Posted May 20, 2010 I've just discovered a huge roll of webbing belt about 8" wide in the shed at my mothers, it may well have been picked up by my father at a farm sale donkeys years ago as it looks like it might have been from an agricultural thresher drive. As I can cut it into the requisite width and length, I think I'll try a little experiment............. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.