guy66
-
Posts
785 -
Joined
-
Last visited
-
Days Won
6
Content Type
Profiles
Forums
Gallery
Blogs
Events
Articles
Store
Downloads
Everything posted by guy66
-
Hi Niels, after I had a good lock at you pictures and some other Danish bedford QL's I noted the two easy to spot modifications that the Danish army did on these trucks after the British sold of there overstock. In the cabin the speedo meter has been changed to a km/h type and has a white dial plate and on the engine there is a outer type of oil filter. Certainly there are more modifications (lighting, weapons carriers on the side of the cabin...) but the speedo and the oil filter really caught my eye. Guy
-
Hello Simon, you can find some pictures on the British vehicle page under bedford QL. Guy
-
Name of the driver is: privet Florent Dutrieux 3rd motorized unit of the 5pl brigade piron.Date 4 September 1944, he wend top pay his parents a visit with the QL.
-
bedford QLT from the Belgium brigade Piron, picture is just from after the liberation of Brussels.
-
The start of my bedford QL project!
-
By this I want to introduce me on hmvf. Owner of several classic bikes and with the restoration of my triumph 3hw bike the start was made for one other military vehicle, and now i want to start with the rebuild of a bedford QL. Some pictures of my 3hw.
-
<Hello Ian it is not op the road from Niels butt it is very nice to see that outer people are in to bedford QL restoration. I am from Belgium and it is still some way from Denmark! Guy
-
Yes the pto pick up is on the transfer box and also the regulator control box inside the cabin is still in place. The chassis middle cross section was cut for the crane on the chassis and there will normally be the extra generator be mounted. Guy
-
Hello Niels, Shortly I will start with the restoration of my bedford QL. I have to start with the truck and a bare chassis.It started life as a QLR radio box and lost the box after it was sold by the army and was equipped with a crane for the lumbering trade (as so many 4x4 trucks after active service)[ATTACH=CONFIG]0[/ATTACH]. As you can see on the pictures I will need a rear body and think to make a QLD body for it because tracing a original cargo body will be very difficult. But no panics I know somebody locally with a QLD that i can use as a sample to copy the rear section.
