Jump to content

AndyB

Members
 View Profile  See their activity

  • Posts

    91

  • Joined

  • Last visited

 Content Type 

Everything posted by AndyB

  1. AndyB
    Try this email address? As they sent an email recently to confirm details Project70hq@aol.com Andy
  2. AndyB
    Nitro & Dave See PDF attachment Andy Gearbox_Dodge_6x6.pdf
  3. AndyB
    Nitro PM sent with an extract from the Dodge 6x6 TM on removing the Gearbox Regards Andy
  4. AndyB
    Another possible supplier; http://www.coverscars.co.uk Andy
  5. AndyB
    Just taken a look in the Drivers handbook (Oct 42) for the MW they mention "do not touch the ring of red nuts" Andy
  6. AndyB
    Had the crank reground from 30 to 60 but when it came to fitting the main bearings the Front Intermediate would not sit on the crank due to the width so no end float either. Do I have more metal removed from the crank sides or should I rub down the liners walls to make it fit?
  7. AndyB
    Hi Dave, Where abouts are you getting your engine work done? As I am considering pulling mine and having the work done in preparation for Normandy Andy
  8. AndyB
    Dave PM sent Andy
  9. AndyB
    Davey Nice to see another MW in the local area Andy
  10. AndyB
    Hi Deciding what to do about the controller box on the MW, either source a replacement, fit a modern alternative, or go for an alternator? Has anyone considered any of these options, and if so what was fitted!
  11. AndyB
    Danny Just doing a bit of rewire, is this the bracket? Andy
  12. AndyB
    Hi GPS I have a set of canvas on order from Steve for a 44 Bedford MWD, spoke to him at W&P and he is busy so they mat take some time to be made. Regards Andy
  13. AndyB
    Could you add me to the list as well
  14. AndyB
    Just looked at the one fitted, it is a Fenner B1080 B41 P13 ?
  15. AndyB
    RR Picked up parts today from Chris Morter including a new exhaust valve, in conversation found out that there are two types of exhaust valves those that are the same thickness as the inlet valves and others with thicker stems. I have the thicker ones, and the same head set up that you have Andy
  16. AndyB
    Having just removed the cylinder head, I thought I would ask the question why is just one of the valves a light brown colour whils all the others have a light carbon coating?
  17. AndyB
    Hi Had a discussion today about the length of the straps for the roof and we both wondered ][ATTACH=CONFIG]74992[/ATTACH] [ATTACH=CONFIG]74991[/ATTACH What is the bracket is for on the rear frame, any ideas?
  18. AndyB
    I remember seeing 4QLR,s in Detmold, Germany sat in the 20 Armd Bde Workshop CAST area in 1972/73 Andy
  19. AndyB
    Nath Just recently aquired an MWD, that needs some minor work and a general tidy up. But the canvas is well worn so I will be looking to have a full set made with a copola ring. Perhaps if there are a few of us after a set it may make it more worthwhile to produce. Andy
  20. AndyB
    Here is another one http://autos.groups.yahoo.com/group/BantamTrailer/
  21. AndyB
    Noticed that the OGEL (Vintage Military Vehicles) has been revoked and replaced by OGEL (Historic Military Vehicles and Artillery Pieces) it would appear that lobbying has paid off?
  22. AndyB
    I have been pondering the question as to what is the smallest sized commercial trailer needed to tow a jeep to shows and could this be towed by a Freelander or would you need something bigger
  23. AndyB
    This was taken in the mid-sixties, REME repair park
  24. AndyB
    Here is a link that may be of use? then look at the OGEL Vintage Military Vehicle http://www.berr.gov.uk/whatwedo/europeandtrade/strategic-export-control/licences/ogels/military/index.html
  25. AndyB
    The link takes you to the legislation http://www.opsi.gov.uk/si/si2008/uksi_20083231_en_9 Just to add to the debate, my interpretation is that if you have a 12v Ex MOD Landrover you dont need one. But for a 24v FFR you do? AndyB
×
×
  • Create New...