john1950

Some Land Rover Defender spares to clear. ESR2242. Fuel tank. STC569g 10 inch brake shoes NRC4842 Radiator hose. ERC8861 Timing belt tensioner. NRC9730 Tie rods. NRC8889 Rear silencer These are N.O.S. Open to offers.

Ex Min Earthing Reel £5 each

Ex Min. Westair 240 v cable reel Offers around £25

Pleased to be of help. John.

I wonder if anyone can help me.

Some time (2 years!) ago I stripped down the CAV control box from my Matador as it was in very poor condition and incomplete.

It's ready to go back together and I now have a couple of problems:

• I took many photos as I dismantled it but I was burgled and the PC with the pics was stolen
  
• The wiring was chopped about in it's time as a bus recovery truck
  
• The metal cover on the front of the box is missing
  

With the aid of the manual, wiring diagram and some pictures from threads on this site I have got it about 80% complete but the wiring of the internal bus-bars from the main isolating switch to the upper board with the light switches and connector strips is not shown on these.

[ATTACH=CONFIG]119063[/ATTACH][ATTACH=CONFIG]119064[/ATTACH]

 

Does anyone have a control box that I could measure and photograph? Preferably off the vehicle so I could look at the back where the bus-bars (actually thick solid copper wires) live.

I'm in South London and sometimes East Sussex.

 

If anybody has a Matador control box or the metal cover for sale I'd be interested as well.

 

Thanks

 

Paul

Try Witham Specialist Vehicles. you can bid on line and they can arrange shipping.Also Jacksons the old rocket site Bawtry. Not far from Robin Hood Int. Airport. Good luck John.

Thank you for posting.

Looking for a Flywheel for a Rolls Royce C4SFL Engine, other parts also to buy or trade.

I am enjoying reading this thread:-D

Hi John Pics not come through. Call or txt me me on 07973 720507 if you want to. Regards andy

I will try again.

Bedford mj transfer box input and three outputs including winch drive. Offers

Hello. This is the first time I have posted pictures on this site. Any problems please advise. Thanks John.

[ATTACH=CONFIG]118352[/ATTACH][ATTACH=CONFIG]118353[/ATTACH][ATTACH=CONFIG]118354[/ATTACH][ATTACH=CONFIG]118355[/ATTACH][ATTACH=CONFIG]118352[/ATTACH][ATTACH=CONFIG]118353[/ATTACH][ATTACH=CONFIG]118354[/ATTACH][ATTACH=CONFIG]118355[/ATTACH]

Anyone got a spare seat for Bedford MW series 15cwts or a QL seat would do. Also after a good fuel tank and any used canvas ..tilt cab and seat covers /cushions... a good usable gearbox and any cylinder head manifold parts...Also the 2 front cab hoops that allow the cab roof to "fold " back... not asking much really !! :-D Many Thanks

Anyone got a spare seat for Bedford MW series 15cwts or a QL seat would do. Also after a good fuel tank and any used canvas ..tilt cab and seat covers /cushions... a good usable gearbox and any cylinder head manifold parts...Also the 2 front cab hoops that allow the cab roof to "fold " back... not asking much really !! :-D Many Thanks

Hello. I will sort some photos. Prices flexable/ offers

Hello. Welcome from another newbe :wow:

Anyone got a spare seat for Bedford MW series 15cwts or a QL seat would do. Also after a good fuel tank and any used canvas ..tilt cab and seat covers /cushions... a good usable gearbox and any cylinder head manifold parts...Also the 2 front cab hoops that allow the cab roof to "fold " back... not asking much really !! :-D Many Thanks

Hello. I have a box with some cy heads and other 28 hp engine bits in.

Hello to all from North East England. I am a retired no military jack of all trades just interested in military vehicles. Background in earth moving and HGV driving. First bulldozer driven, Vickers Vigor. first loading shovel Hough Payloader, first Motor Scrapper Leyland engined TS14. First truck Bedford O type hand tipper. Last Scania G440 and tri axle trailer.