Jump to content

Bedford mj newcomer


Mgtc1949

Recommended Posts

Hi all, I have just bought an mj to use as an occasional log lorry for my tree surgery business. It arrived this morning and I have a few questions.

First off, where is the fuel stop ? I can't find it anywhere,

How is the pto engaged so I can use the crane?

And the prop was taken off to spec lift it here and one of the studs is spinning trying to undo the nut. I have used a spanner, next I will try an impact gun but failing that is it a pinion off job?

 

I will upload a picture or two when figure out how.

 

Many thanks in advance.

Ed

Link to comment
Share on other sites

IMG_0003.jpg

IMG_0005.jpg

IMG_0004.jpg

IMG_0002.jpg

 

here we go. i have played a little more and found the switch for the crane and winch and have learnt where the off switch is. it need a new cable but all fine. bought wing mirrors yesterday. haven't fitted the prop yet as the stud is still spinning and burst a hose on the crane so need to take that off and get a new one made up.

all in all, i think 'Betty' and I are going to get along just fine.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...