-
Posts
43 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Events
Articles
Store
Downloads
Everything posted by DafT 244
-
CB 300 Series Comms Body Lifting shackle info please!
DafT 244 replied to DafT 244's topic in HMVF Classifieds
Hi Iain, Managed to get 4 shackles today to do the job here! Spent nearly 4hrs on the 'Net searching for the right shackle pin, diam, corresponding 'Jaw' size but no luck and was then recommended a company not to far from me and sorted me with certified shackles that fit the job perfectly! Individually they are rated at 15cwt/.76T and together will lift 3T ! They each fail at 3T... Thanks for your help Iain ! Regards Gaz Andy Tomlinson E: sales@chesterchain.co.uk -
CB 300 Series Comms Body Lifting shackle info please!
DafT 244 replied to DafT 244's topic in HMVF Classifieds
Much obliged Iain, and Thanks for your time! So they are the same shackles for the side lift plates...SWL 2195 Lbs! Thanks Gaz -
CB 300 Series Comms Body Lifting shackle info please!
DafT 244 replied to DafT 244's topic in HMVF Classifieds
Hi Iain, If I may ask another Q? I had ordered what I thought were the 4 correct shackles from XMod a couple of days ago,as they didn't state the pin diam in the advert, I asked them Not to send them if the pin diam was over 3/4" 19mm... https://www.thexmod.com/item_detail.asp?id=2867&t=Shackle_2_3/4_IN_Inside_FV2084745 Got a refund from them this morning! Do you happen to have the part no. for the one's you use? Regards Gary -
CB 300 Series Comms Body Lifting shackle info please!
DafT 244 replied to DafT 244's topic in HMVF Classifieds
Oh that's a point Iain! Don't the Zeppelin cabins have that facility so the truck can drive from under the cabin etc? Or maybe the Yank ones..... Gaz -
CB 300 Series Comms Body Lifting shackle info please!
DafT 244 replied to DafT 244's topic in HMVF Classifieds
Iain, you are a Godsend Mate! And that is a proper Engineering Workshop isn't it? Lathes & pillar drills etc.... The top corner brackets...I thought they were for Antennas or something like, it looks like that is what they are really for? But thinking about it, if there is one on each corner, they would act as a spreader bar wouldn't they? And BIG Thank You for the photos, I can work out the exact length of each of the 'Brothers' when I arrange the Lift! Bouncing here.. Gaz -
CB 300 Series Comms Body Lifting shackle info please!
DafT 244 replied to DafT 244's topic in HMVF Classifieds
If so, had a look at the other not yet covered over with insulation... Not realising they are actually mounted to the floor/base as well, I'm quite happy to use them to lift the cabin off!. Just need to source some 1 1/2 Ton shackles now, I think I already have some! And will save me the expense of having 4 side brackets made up too! Thanks again! -
CB 300 Series Comms Body Lifting shackle info please!
DafT 244 replied to DafT 244's topic in HMVF Classifieds
-
CB 300 Series Comms Body Lifting shackle info please!
DafT 244 replied to DafT 244's topic in HMVF Classifieds
-
CB 300 Series Comms Body Lifting shackle info please!
DafT 244 replied to DafT 244's topic in HMVF Classifieds
-
CB 300 Series Comms Body Lifting shackle info please!
DafT 244 replied to DafT 244's topic in HMVF Classifieds
Hmm, yes, wise advice Richard, especially as I can probably get them from just down the road! Thanks Gaz -
CB 300 Series Comms Body Lifting shackle info please!
DafT 244 replied to DafT 244's topic in HMVF Classifieds
That's handy to know Iain Thanks! I could not find any info on the web about the plates after searching the NSN! Do you still have the plates Iain? The pins are 13mm, the threaded holes seem to be M12 but, with the age of the cabin (Pre Metrification,) I'm wondering whether they are actually 1/2" something or other? It may be quicker to tap them out to Metric? I will keep you posted with my progress 👍 Cheers Gaz -
CB 300 Series Comms Body Lifting shackle info please!
DafT 244 replied to DafT 244's topic in HMVF Classifieds
Iain, you are an info God Sir! Had a look on xmod and no luck there...And I think maybe too expense for a single off & on lift! At least I have all the info now on how it's done! Got a local Engineering firm who no doubt can come up with something simpler. see pic. I did not know that the holes were threaded and there is reinforcement underneath! Thanks again, you have saved me a fair bit of head scratching there Mate! Cheers Gaz -
Hi! Does anyone have a photo or Part No of the shackle/Plate? Does the 'lifting plate' go up into the channel of the rail, or slot into the circular holes in the side of it? Thanks in advance! Gaz
-
Saving Private Ryan Das Boot Kelly's Heroes Cross of Iron Longest Day Downfall Fury Paths of Glory All quiet on the Western Front Sands of Iwo Jima Dr Strangelove (How I learned to stop worrying and love the Bomb)
-
question CB 365/5 Work shop Body...Thread sizes used question.
DafT 244 replied to DafT 244's question in I may be stupid, but......
Hi Ruxy! I tried quite a few threads with the bolts expecting the same...I even tried some from the back but no luck there! As you can see from above photo, the tap went through ally and steel really easy! Cheers Gaz -
question CB 365/5 Work shop Body...Thread sizes used question.
DafT 244 replied to DafT 244's question in I may be stupid, but......
-
question CB 365/5 Work shop Body...Thread sizes used question.
DafT 244 replied to DafT 244's question in I may be stupid, but......
Hi Guys, I met with John today and he had kindly brought some bolts with him for me to try on a piece of framework but the answer was no....When I got home, the postman had been and delivered a couple of bolts I had ordered.... Still no luck! So far, I have tried M8,5/16 UNF,5/16 BSF and lastly M8 Fine (1.0 pitch)...BA only goes to 6mm in diameter so it looks like I will have to try the first suggestion and that was to tap them out to M8...will have a go now and let you know! (Would be a lot simpler I suppose!) However, I did find some thing that does fit! There are lots of smaller rivnuts installed and i found a bolt that fits perfectly but, here we go again, its NOT Metric Ha ha! Regards Gaz -
question CB 365/5 Work shop Body...Thread sizes used question.
DafT 244 replied to DafT 244's question in I may be stupid, but......
Hi David and thanks for the info! I have just ordered 2 of 5/16 BSF and 8mm Metric Fine (1.0) bolts....For a couple of quid, I will be a bit wiser! Will keep you posted! Thanks Gaz -
question CB 365/5 Work shop Body...Thread sizes used question.
DafT 244 replied to DafT 244's question in I may be stupid, but......
Hi Richard, I am thinking it is possible you are right...it may be a metric fine...I know these were tapped after the 'box' was built as there is swarf behind the formica/hardboard cladding! I don't have any bolts Richard, only the threaded holes, I don't think a thread gauge would fit in the hole! This is turning into a crusade now Ha Ha! Gaz -
question CB 365/5 Work shop Body...Thread sizes used question.
DafT 244 replied to DafT 244's question in I may be stupid, but......
Hi John, that is so kind! I just need to know the size I am dealing with! Sealand is just 10 mins away from me, you could do your biz and then let me know where to meet.I will bring my section of frame with the tapped threads in, and we can sort which one's fit! Will PM you with my mob no. Much obliged Gaz -
question CB 365/5 Work shop Body...Thread sizes used question.
DafT 244 replied to DafT 244's question in I may be stupid, but......
Hi John and thanks for the quick reply! 5/16 BSF...That's going back a bit isn't it? I am doing the same as you with the conversion to a motorhome/camper... there must be a couple of hundred at least, all I want to do is identify what thread they are so I can use the existing holes where my cupboards etc need to be secured! Today,I have eliminated 5/16 UNF as a contender so will order a handful of cheap bolts off Ebay and try them! And thank you for your kind offer! It's easy to get obsessed with things like this isn't it? Cheers Gaz -
question CB 365/5 Work shop Body...Thread sizes used question.
DafT 244 replied to DafT 244's question in I may be stupid, but......
Hi fv1609, Thank you very much for your time and quick reply! I have 2 data plates on the body...there is one mentioning the NSN number but it's blank on the plate! I have found this info (on here): C 039/23 Shop Equipment, Electronic Repair, Truck Mounted, CB365/5. Misc.Instr.No.1.Apr.1982 and it seems my 'box' is thirty four years old! The other data plate says FV727343 on it! Having mostly stripped the formica covered hardboard, it looks to me this was a later mod from all the swarf that I have found behind it! Here are the pics of the data plates. Cheers Gaz