mogmaner

Is this of help como netting in youse pic taken by my father about 1952 .

Looks like an dipole aerial center ,high power judging by the construction and N type socket at the base.  

I have a canvass for a 12x12 catering tent ,if I remember right the side,s are also lined ,never got round to finding a frame .

This any help ?pic taken 1950/51

Here's the other pic 

The picture's date from 1950/55 period, there is on problem with keeping a copy of the picture for reference. There is another picture with the roping and eyelet spacing showing clearly if that helps .

Is this of any help one of my father's pics 

Mine has a Nissan K11 998cc 16v twin cam retro fitted.

The shape look about right for a toe jack.

Dose this help ,will measure trailer when I can get to it.

Lorry anti rollbar  mounting 

I think this is the pole carrier , one of my father's pics 

Straight 30 winter 40 summer low detergent oil if I remember  correctly. 

Is there any member with experience of this set,  hope to restore it to working in the long run 

With clansman I would  remove one off the wires from the battery stud terminal , so there is no risk of powering up accidentally. For working sets like 320 321 351 and other, I have receive only hand and head sets on them with a TX hand set in a safe place for demo working Keep safe Graham G1DNZ 

These rules also apply to sets such as AN/PRC 90 pilots survival radios. Which youse 240mhz distress frequencies. 

I youse RH for my insurance ,I have 4 motor  with them been pleased with there service and prices 

Is this the one with w/d pressed in the top under the handle , if I may have one. 

Have you tried eBay de  

Could this be a trial setup for the trailer truck combination ,as the prototype  Civilian antar  would be around in 1948

Yes found one on smoke stack engine forum .

Not yet  ,hope to start on it over the summer. 

Nice to hear you intend save its history, factory fresh is nice but dose not tell a story of its life in service.

Back in work shop tomorrow will look in my junk box. They work  on magnetic induction ,as the ring gear teeth pass the sender they induce a AC voltage which is fed to the controller, as the speed goes up or down its conspired to the set reference for up or down adjustment to the speed.send me PM so I can let you know what I find.

Newton Derby were on Alfreton rd Derby ,not sure if still there ,will have a look to see if I have one.