44GPW

Thanks Rippo. So the back of the cover is open rather then then the cover fitting like a sock over the back of the seat? Still can't understand how the flap is stopped from coming away from the body of the seat though?? Richard

There were 2 on each side, 1 at the top of the body near the cab, the second sits directly underneath on the third plank. From what I understand, there were 2 types, the triple and a double with an elongated second hole. Richard

Guys, I need 3 more of the attached for securing the hoops at the front of the body on an MW. If i cant find originals i'm thinking of getting some made, so if you need some also send me a PM. Hope someone can help!! Thanks Richard

So, the Marine clean does not remove the rust, just cleans it? You then cover the rust with the sealant....correct? Richard

Appreciate the help Rippo. Thanks.

Hi Chris, Think I have found the Kit in their catalogue? Was it a four part process costing £60? Does that really work?? How rusty were your tanks? Thanks Richard

Hi guys, One of the fuel tanks on my MW has not been used for many years and is rusty internally so I need to get it cleaned. I assume chemical dipping is the best course of action? Anybody had this done or cleaned the inside of a fuel tank using a different method? Thanks Richard

Ok, thanks for that. It does look neat, but i have no idea how the loose edge would be attached to the seat?? Any ideas? Thanks Richard

That's brilliant, thanks. If you could have a look at how your seat cover backs are finished off at the base as well, even better. Cheers Richard

Thanks Rippo, If you could measure the length of yours I would really appreciate it. Is there a Gator on the gear stick as well? There are holes for the handbrake one in the floor I believe. Thanks Richard

Hello Snort, Yes, the PO said it came from Ely way. I'm very pleased with it so far. Lots of bits to sort, the wiring mainly, but all in all its just what i wanted. Be interested in anything you can tell me about it? PM me if you have any info. Thanks Richard

Thanks Richard....now i understand. Was your loom finished off with period looking sleeving or not?

Thanks Jules, I assume i will have the choice to renew the original or use it? Richard

Richard, What is the CAV control box (just so i know what i'm talking about when i speak to them!!) There is a small black box marked Rubbolite under the body of my MW, just above the rear axle. Is this a CAV control box? Thanks Richard

Hi all, I need to finish the backrest of my MW seat covers but am unsure exactly how they should look? Here is a photo i found of Curruthers MW. Is this the correct way the covers should be finished off? Any help appreciated. Thanks Richard

Guys, Someone tried a very poor Scam attempt on me following my ad in the classifieds "Wants" section on this forum. He claimed to be "Parting Out" a Bedford MW and had all the parts i required. He used words like "Cell phone" "Parting out" and wanted payment via Western Union or Moneygram, yet claims he is based in London?? He could not give me a photo of the parts, only the Bedford they were "parting out" which happened to be one i had seen being restored on this forum (see below). Anyway, he goes by the name of Jonathan Clayton. How do i report this to the correct authorties? By armyspecial at 2012-01-31

Richard, I've been given the following two options from Autosparks. BF14c BB 40/44 15cwt MW General Purpose BF23c BB 40/45 "MW (7067035)" With CAV Control Box & Brake Lights Any idea which one i need please? Thanks Richard

Thanks Julian, and good to see you at Stoneleigh yesterday. Yes, had a chat with him. He retires in June, so need to get it sorted before then. Price seems resonable and he knows his stuff so may well go for it. I think its just the front Canvas i will replace. Mine, although original, is tatty and no longer has its Canvas support straps. Cheers Richard

Thanks Richard, i will give them a call.

Thanks guys. Got answers to questions 2 & 3 but does anyone know of a replacement wiring loom manufacturer? Can make my own but would rather buy one already done if available. Found some bits at Stoneleigh today, the correct NOS Solex Carb, a pair of NOS seat covers, Manifold gasket and a pair of small period reflectors. Need to do something with the steering wheel which is in very poor condition and missing its centre. Long term I will restore it but short term I will search for a replacement. Anyone know where there is one for sale? Is it the same wheel as used on other Bedfords like the OY etc? Thanks Richard

Hi Guys, Well after a busy day i finally got my MW home and squeezed it into the garage with my Jeep and Jeep project. Nice original RAF MW, i'm sure some of you will be familar with it. Lots of good bits and some not so good, but i wanted something that needed a bit of tidying up, so its perfect for me. Only a couple of photos as i ran out of time, but will add some more detailed photos next week. A couple of questions. 1. Is anyone doing replacement wiring looms? 2. Are the door stop straps supposed to be leather or webbing (a photo would be really helpful). 3. Handbrake gator -does this fix to the floor with a plate like a Jeep, or just screwed through the canvas (again, a photo would really help. Thanks Richard

Hi all, Tomorrow i become the owner of a 1944 Bedford MWD. Just wanted to share my excitment Photos and lots of questions to follow!! Richard

Hi Mike, thanks for that. Will have to meet up and compare MW's?? Cheers Richard

Thanks Rippo. really helpful. Richard

Ivor, Thats great....thanks for that. Still a little confused though?? Would a 1944 MW originally of had the metal version of the small Rubbolite lamps (1 stop and 1 tail) and would they have been fitted on or near to the toolbox? The photo of the "bail out" shows them in the same position as Maurices MW, closer to the centre? As the original set up is not road legal, is the norm for MW owners to fit them in the correct position, then have an additional road legal set mounted? Thanks Richard