sirhc
-
Posts
4,252 -
Joined
-
Last visited
-
Days Won
22
Content Type
Profiles
Forums
Gallery
Blogs
Events
Articles
Store
Downloads
Posts posted by sirhc
-
-
I would try getting in a Sabre or Scimitar before buying one.
User handbooks are here:
-
Are you talking about the gunners sight? Do you have the complete sight and control box? There’s only a couple of plugs.
-
10 hours ago, robin33ba07 said:
any one put a temperature gauge into a diesel CVRT ?
No, but Google is your friend. Plenty of options for 6bt temp senders out there.
-
Photo is quite old, I expect they’re mostly gone by now. They were DAFs.
-
Well done, however... It’s a SUMB not a sump!
-
If it’s a Mk2 then it is not tall enough for a Wolf
-
WD40 is a waste of time, you need this stuff:
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F172985432834
Some heat won’t hurt either.
Chris
-
BS381C shade 285 NATO Green
-
The temp sender for the warning light is on the inlet manifold near the distributor. Remove it and find something that’s 24v and has the right thread, then find a compatible gauge. Shouldn’t be that hard.
-
The Fox has a temperature gauge with the J60.
-
-
Please send me a link to the post you want to delete.
Chris
-
Mark,
are they new or used?
Chris
-
-
That block does look quite worn but they should be able to repair the valve seats.
-
Hi Paul,
to answer your question you need to know if the bores have been done previously. You can do this by measuring but it might be easier to see if there’s any markings on the pistons +.010 for example. Once you know this you can see what oversize pistons are available. If you find a good engine machine shop they’ll be able to help you out.
Chris
-
Try giving Andrew Baker a call. https://afvsociety.com/
-
It’s electric.
-
Try 1/4 Unf and look on eBay.
-
1
-
-
Looks like Centurion to me.
-
As long as you aren’t doing sharp turns I think the gravel getting stuck in the wheels might be more of a problem. I had a Sabre which looked like it had been used on gravel and the wheels were a mess.
-
It’s a CVRT... combat vehicle reconnaissance tracked.
-
I think you’ll find the price for rerubbering to be much more expensive than a take off wheel.
This is where the new ones are made.
-
There are plenty of other governments out there using CVRT. Some of them only recently acquired them. The spares are worth a lot more abroad than they are to collectors. A lot of vehicles end up stripped for spares. Once the UK MoD gets rid of the rest of the fleet this will make parts harder to come by.
https://www.joint-forces.com/features/13060-armour-focus-new-latvian-cvr-t-fleet
Cupola CVRT
in Tracked vehicles
Posted
Lance,
do you have the Spartan ISPL?
https://www.greenmachinesurplus.com/cvrt-spartan-illustrated-parts-list-209-p.asp
You might find it useful..
Chris