bigtoemonkey Posted March 19, 2014 Share Posted March 19, 2014 hi all I am replacing the vacuum operated wipers on bedford mw, was after some info /advice its been fitted with an electric wiper from a land rover which I have removed ,have got new vacuum operated units from chris morter ,wanted to now were the vacuum reservoir connected into the inlet manifold.to feed the resevoir and can see the pipe going in to the cab, how that split into two ,to feed both units any input gratefully received regards Duncan Quote Link to comment Share on other sites More sharing options...
Danny P Posted March 20, 2014 Share Posted March 20, 2014 If you still need the information I will post some pictures this weekend. When I forget just let me know! Danny Quote Link to comment Share on other sites More sharing options...
Danny P Posted March 21, 2014 Share Posted March 21, 2014 Hi Duncan, As promised some pictures of the vacuum connection for the wipers and pressure vessel. Vacuum connection on the inlet manifold From the inlet manifold to a 3-way assembly. Two plastic tubes (which should be rubber I think) for each wiper. 3-way assembly (the metal tube in the right upper corner going to the pressure vessel) Hope this is what you were asking for? Regards, Danny Quote Link to comment Share on other sites More sharing options...
bigtoemonkey Posted March 26, 2014 Author Share Posted March 26, 2014 many thanks danny, gonna have a play this weekend think i may be missing the three way valve you mention ill have a look and see what ive got many thanks regards duncan Quote Link to comment Share on other sites More sharing options...
.thumb.JPG.fbe532a8a386c5010fe8daa1ff85aa23.JPG)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.