pockers Posted January 22, 2013 Share Posted January 22, 2013 Taken the wings off my m38a1 for some work and engine repaint manual says there should be anti squeak webbing betweenthe bulk head and wing but there isnt any should i source some before replacing? there were no sqeaks before so .... I understand that its webbing , does this not act as a water trap? Any tips / advice gratefully recieved Quote Link to comment Share on other sites More sharing options...
Willyslancs Posted January 22, 2013 Share Posted January 22, 2013 http://www.woolies-trim.co.uk/ try here mate ........ also used rubber strip before now , webbing (ex army straps are ok too) Quote Link to comment Share on other sites More sharing options...
willysmb Posted January 22, 2013 Share Posted January 22, 2013 Well unless its a Concourse Restro Don't bother ...Have you heard any Squeaks ????? Never included them on my restros and don't have any on my own jeep ...never had an issue and yes the webbing will retain water and help the tim worm get a good foot hold . Quote Link to comment Share on other sites More sharing options...
pockers Posted January 23, 2013 Author Share Posted January 23, 2013 No this is defo not a concourse job, and the metal moth is one reason the wings have had to come off There was none there and no squeaks so didnt think it neccessary Just thought id check before rebuild Thanks Quote Link to comment Share on other sites More sharing options...
pockers Posted January 23, 2013 Author Share Posted January 23, 2013 http://www.woolies-trim.co.uk/ try here mate ........ also used rubber strip before now , webbing (ex army straps are ok too) Many thanks infact woolies stock a few other bits i need Quote Link to comment Share on other sites More sharing options...
.thumb.JPG.fef88ee0409d60bbb480db613c124484.JPG)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.