Mark

Many thanks Mike, yes it does as I need to get some labels made up for these.

Now just to get the others done. :tup::

Just how big is this yard of Harry's anyway

I fancy a drop of Chateau Milton Keynes...

HI All

As you may well know my workshop jimmy has a Swiss body on the back and there are a few words that I am not familier with, so if one of you nice lot over the channel can have a look below and see if you can interpret the meanings I will be much obliged. (some are obvious) and bearing in mind thay are from an electrical panel in the truck.

Many thanks.

STECKDOSE 380v

PRISE EXTERIEURE 380v

SYSTEMUMSCHALTER

COMMUTATEUR P SYSTEME

PHASENSPANNUNG

TENSION PHASE NUETRE

AGGREGAT

GROUPE ELECTROGENE

HEIZUNG

CHAUFFAGE

STECKDOSEN 3PH

PRISES 3PH

SCHMIRGELMASCHINE

MEULE

STECKDOSEN LINKS

PRISES GAUCHE

LICHT

ECLAIRAGE

STECKDOSEN RECHTS

PRISES DROITE

TRENNTRAFO

TRAFO DE SEPARATION 200v

Paul

As I am sure you understand the forum is ever so, ever so slightly changing as time goes on, this is to keep it in the fore of what is going on in the MV world and this means that certain parts of the boards/buttons will change as well, but as you can see we listen and we act.

Thank you for your feedback :tup::

Yeh have a nice weekend all.

Hey Joris when they have all gone you me and Enigma have the clubhouse all to ourselves, what do you reckon a few beers and some old friends :cool2:

been keeping tucked away from the rabble (if you know what I mean)

Did they give you a free drink from the lorry :cool2:

I believe that the truck maintenance is farmed out to another firm :sweat:and gladly is nothing to do with someone (who I know very well) :cool2:

I know the guy you are talking about John, if you want some.

Have you took the top of the engine yet to have a look ??

No, is my opinion as the mileage you do does not warrant it for the cost, when I stripped my jep engine down there was no wear on the valve seats and that just runs unleaded.

Do you know if it has seen service at all Neil ?

Think we are allready in check on monday

Thank you :tup::

Looks like I might be down your way depending on crewing levels.....make sure everything is tied down well!!

If you need some crew give me a shout.:-D

Earth problem

Well done, nice drum..............................what is that in the background. :cool2:

Are you sure that is a Land rover ?

Err - I call someone when the Ward runs out of fuel. - Sorry Mayhem.

 

Markheliops

Sorry I could not help at the time Heli

Thanks Bodge

So far it looks good no leaks, cheated a bit and put some home made ones in from proper gasket paper.

Got the half shafts and new seals in yesterday so I thought I would take her out for a ride as it was a nice day.

Very invigorating

What did you wire the rev counter upto ?

Happy Birthday to my good mate John, hope you have many more matey and enjoy this one. :dancing: