-
Posts
1,712 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Events
Articles
Store
Downloads
Posts posted by Chrisg
-
-
-
Quote " the co rod,without its piston,just will not fall of its own weight when set in a horizontal position , but if given a fairly sharp push from that position it should make about one complete revolution round the pin". From the motor repair manual
-
Most can do it from the part description of what you need. What do you want
-
Got a 4c mine detector and the label on the box appears to be 10 AEB any help with what they mean
-
-
Have a new pin turned up and welded into the old plate
-
Welcome to hmvf Ian. What part of Sussex
-
I think it would classified as a trailer and if over 750kg the brakes need to work
-
30305 is a standard metric taper roller bearing should be available at your favorite bearing stockist
-
The ferodo part number appears to be V130. 46.25 inside diameter
-
I think that they are stepped scraper rings and the step should be downwards http://www.caberpistonrings.com/eng/tecnica.php?sez=4tempi
-
Is there not top marked on the rings?
-
Thanks Tony and Degs!
Here's another for Degs xx
Too much. Need to go and lie down in a dark room
-
Found a reference to a Lucas (Atlantic ) headlight bh1145. 5 & 7/8 dia
-
:tup::
-
Damm jack wasn't supposed to know
Well no problem.The golf course was used as a off road course anyway........not by me offcourse. :angel:
-
You could try autopaints plus in Lewes.
-
Excellent show. Very relaxing
-
Welcome to the forum
73 de. G1GDJ
-
I'll be there
-
Welcome back mate. It was good to see you at w&p.
-
Welcome Steve
-
Welcome & happy birthday
-
Have a look at the page on grease nipples if yours looks like the second picture then on the connector page it should be either item 6 or 7
Orintation of piston in opel engine
in Pre WW2 vehicles
Posted
Isn't it also that the non thrust side is the camshaft side