wc63-1944 Posted February 18, 2007 Share Posted February 18, 2007 Hi All, There seems to be a problem with my cab mounting blocks on the WC63 which I own. The bolts which mount the cab mounts to the chassis, seem to have been overtightened, which means that the cab suspesion mechanism doesn't work properly. As a result, everytime the vehicle goes over a bump or hollow, the cab floorplate catches on the driveshaft undenreath and causes a rattling noise. I am led to beleive that each bolt is placed through a mounting block which in turn has some kind of padding underneath. I have searched high and low on the internet for the answer, but to no avail. I wondered if anyone knew the dimensions for these mounting blocks and pads, and the material of which they are made? Also, whether the front blocks are the same dimensions and materials as the rear blocks. Many thanks in anticipation, Ben Quote Link to comment Share on other sites More sharing options...
Guest matt Posted February 18, 2007 Share Posted February 18, 2007 Hi Ben, Try here http://www.midwestmil.com I'm sure John has the cab mounting kits. Matt. Quote Link to comment Share on other sites More sharing options...
NuttyNick Posted February 21, 2007 Share Posted February 21, 2007 Hi Ben, Try here http://www.midwestmil.com I'm sure John has the cab mounting kits. Matt. Yes John does have them. I bought a set off him when doing my dodge. Reasonably priced as well - a great guy to deal with. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.