-
Posts
660 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Events
Articles
Store
Downloads
Posts posted by Vulture
-
-
Good luck with your search
Points to think about:
- Check for slight tyre bulges.
- Truck should brake really really well (unloaded). If it doesn't there is a brake problem.
- Look for excessive play in the steering. Check the steering box oil level, and looks for leaks around there.
- When out for a drive take it up to 40mph. If the front is shimmying around all over the place, the pins needs replacing on the track-rod.
- Listen out for a blowing cracked exchaust manifold, although you'll probably notice the noise.
- Check exhaust condition. They can take a lot of rust and still hold together, but can be expensive to replace.
A £7,000 budget should get you a nice truck
Kind regards
Vulture
-
Good to see my old GMC reg No KSU 498 is still out and about do you have any more photos of her Vulture ?
Pete
Peter, I'll check and see :-), I think so.
-
Know how many attended?
Slightly down on 2015, if I recall correctly I think we had 86 vehicles (motorbikes included) this year.
-
Thanks for posting, great pics and a lovely day for it
After the crappy weather we have been having recently we were so lucky with the weather on the day . It had been horrible as well the day before with heavy rain showers, hail, heavy winds which were and bitingly cold.
-
Yorkshire MVT held its annual 'Crank Up' event last Sunday. Few pics on my Blog: http://vultureswargamingblog.blogspot.co.uk/2016/04/yorkshire-military-vehcile-trust-2016.html
-
Hi guys
The Vulcan put on a good display on Saturday at the Great Yorkshire Airshow at the Church Fenton airfield.
Here's a quick bit of video I took on my phone
-
Ended up using a silicone sealant on both faces and smeared around the nut heads. Hopefully it will do the trick. Thus far everything is fine, no leaks
MatchFuzee, I didn't have any blue Hylomar gasket to hand, but I'm going to lay some in. Sounds like a good product.
Kind regards to all
Vulture
-
Starfire and NOS
I'm using a brand new Cork seal, which is a good fit, and I've made sure both the surfaces are totally clean that it will be mating with.
Two questions here (just be totally clear in my own mind):
1. With regard the nuts, would you put sealant round those ?
2. Are you suggesting I put sealant onto both sides of the new cork seal as well ?
Kind regards
Vulture (aka Ian)
-
Guys
The Grey Lady was due an oil change so I decided to kill two birds with one stone. Whilst she was empty of oil I dropped the lower oil pan to inspect for sludge.
I was pleasantly surprised to find hardly any at all, so having thoroughly cleaned round and also repainted the outside of the sump I re-fitted it tonight.
Currently all the attachment nuts are back in place and finger tight.
The thought occurs and this is the reason for the posting, would it be prudent to back each nut off slightly and add a small dab of gasket seal, before tightening up?
Currently it is the brass washers around the nuts that are sealing the nuts (which extend up into the sump). I have a worry bead that when I tighten everything up, fill with oil, I'll then find I have multiple oil drips (especially when the oil is hot). That said I didn't have any significant drips before, so am I worrying unnecessarily? :undecided:
Your wise counsel in this matter would be appreciated.
Kind regards to all
Vulture (aka Ian)
-
Wished I could have made it along. If anyone has any photos of the CCKWs that were there, it would be great if you could share them
-
Hi guys
Your wise counsel is sought on the subject of trolley jacks. I'm minded to get a trolley jack to use with my CCKW352 (weight 4.5 ton). I want to be able to lift the front axle up in one easy motion to then put in place the axle stands.
Any suggestions regarding type and specification would be much appreciated.
Kind regards to all
Vulture
-
85 vehicles in attendance today. A record for any Yorkshire MVT Crank Up event.
[ATTACH=CONFIG]103604[/ATTACH]
That is a lot of vehicles ! Shows the strength of the Yorkshire group :-)
-
Were you topping up the radiator the natural way?
[ATTACH=CONFIG]103603[/ATTACH]
Nice one Steve ! :nut: In fact discussing a with fellow GMC owner fuel system configurations :-D
-
I will be there as well, Harley, Jeep or Jimmy ?????
Will have to wait and see
Bring the Jimmy, see if we break last years record of three !
-
Totally awesome work ! I'm in awe of what you have taken on here :nut:
-
-
19th April - 'CRANK UP', organised by members of the Yorkshire Area of the Military Vehicle Trust (MVT) at the York Castle Museum, Cliffords Tower, York. This annual event now running for over 12 years, sees the spring airing of military vehicles of all ages. Start time from 11.00 am onwards. Contact Chris Smyth. E-Mail: chris-smyth@tiscali.co.uk
-
Paul
You can download a copy of the main manual here:
https://www.dropbox.com/s/nyb69ls7zbkjzc5/CCKW_353-352__Manual.pdf.PDF?dl=0
Essential bed-time reading
Ian
-
Hi Paul
The CCKW is a truck with a lot of personality
The closed cab is very stylish, but if you want to take two others with you in the cab, or have that option, then you need the Open Cab.
The best idea is to take someone along with you when you go to view.
Where abouts are you in the world ?
Kind regards
Ian (aka Vulture)
-
Update guys. Bled the system, problem sorted !! Pedal is where is should be :dancinggirls:
Still going to have the wheels off in the new year to check everything over though.
-
Silly question but with all the messing about you've done, have you reset the gap on the shoes with the snail cam adjusters on the drums?
Hi Tony
The short answer is no. I'm going to bleed the brakes then get hopefully get someone with better facilities then myself (which wouldn't be hard) in the new year to have all the wheels off and give the brakes a good look over and the truck a general safety check.
Cheers
Ian
-
After weeks of rubbish weather, the sun has been out here in York. Managed to make time to get the truck home today. The brakes are working, but a huge amount of travel on the pedal, although it does come up if you pump it. Plan to bleed them this week, and re-gap the points and plugs (was a bit reluctant to start).
Kind regards to all
Ian
-
Well I am pleased to say that the dump truck was collected today by her owner, who was very pleased with the result. So keep your eyes open and you may see her on the show circuit. Thats another satisfied customer. Now for the next project.
Stunning job Howard :clap:
Ian
-
American base uses tank transporter to remove tree stumps
in American Vehicles
Posted
Impressive pulling power !