phil.c
-
Posts
115 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Events
Articles
Store
Downloads
Posts posted by phil.c
-
-
Anyone out there had their combat rims straightened? I have a set and would prefer to use them but all are buckled.
Phil.
-
Thanks chaps, Thought about doing it myself but not sure if the shaft is damaged.
-
Hi, my generator rear bush has worn and needs repairing. Is there anyone who has experience of this type of job. My local electrical motors shop had a look but says its a bit beyond his scope [probably needs machining]. Generator is a late type with sealed bearing at front and bush at rear.
Phil
-
-
Can anyone clarify what the original spec,manufacturers,and sizing was for jeep tyres,and does anyone in the UK stock similar?
Many thanks
Senschu
I don`t think they had a specific maker so could be fitted with Firestones, Goodyear etc. Ford made their own tyres early in the war but read somewhere that Russia had all the equipment off them to produce over there. Size is usually
600 x 16. Only seen firestones available lately.
Phil
-
Thanks Paul, much appreciated
-
Hi. Thinking of buying a 30 or 50 cal copy (originals just too pricey). Trying to find some feedback on cross fire but can't find much on the internet. Nice to see some pics if anyone's got any, also do they make jeep mounts?
Phil
-
Thanks for all your responses. Very helpful.
Regards
Phil
-
Hi Michael, looks like only one of those springs is a Ford mate, what sort of money we talking about for just that one?
Regards
Phil
-
Hi guys, I have a very slight leak in my GPW fuel tank so was hoping to try one of these sealers you pour in and slosh about. Anyone had any experiences with them good or bad and which should I opt for?
Phil
-
Send me some pics if you can please.
-
Thanks Pete, got my eye on that. Cheap buy it now but shipping gets silly the more you add!
-
Now looking for the Ford spring clamps/clips if anyone can help.
Phil
-
Thanks Pete, actually only need fronts so fingers crossed.
-
-
Tents
in MV Chatter
Hi, looking to buy a US small wall tent. Original ones I know are a rarity but who makes a quality copy in the UK, is there much difference between 13oz or 16oz weights. Advice greatly appreciated.
Phil
-
Thanks again for reply, that gives me something to go on so will look at the weekend
-
Good stuff, will do that tomorrow.
Thanks
-
Thanks for your reply. The leak is actually coming from the nut in front of the pulley so am I right to assume that if the leak was at the seal it would come from the back of the pulley?
Phil
-
I have a problem with an oil leak that looks like its coming from the pulley crank nut [ not the back of the pulley] and flicking oil around. The pulley seal was changed so fairly confident its not that. Is there a seal that should go behind the nut?
Phil
-
Will give it a go. Would like to keep the cable I have as it looks like an original metal type. Would the inner cable be damaged but not show i.e stretched?
Thanks
Phil
-
Thanks Paul, will try that first and see how it goes.
Regards
Phil
-
Trying to sort out my speedo in my GPW,needle just bounces. Whats the most common problem for this. My cable is a little tight [53"] but looks in good order. Is there anyone in UK who has experience in servicing jeep speedometers?
Phil
-
Thanks for your replies guys, been busy over weekend so haven`t had time to check forum, may have been a bit premature with my diagnosis. When these things happen I always fear the worst! Pump seems to have packed up so changed that and seems to be keeping pressure but hasn`t had a run yet. Would like to rebuild at some point so will keep posts for future reference.
Phil
Jeep combat rims
in American Vehicles
Posted
I would attempt it but haven`t got the facilities.