phil.c

It would be English

Hi guys,  whats a BC-1000-A, SCR-300 worth nowadays?

By the look of that pitting I would say originals, what studs do you mean?  Be careful buying old wheels as they tend to be buckled.

Has anyone got pins for a D58626 mount and a m23 early mount. Also after ammo trays to suit.

I have a friend who runs that setup so it does work, if I remember correctly the bushing that fits into the transfer box that the cable connects to is different on wartime jeeps.

Looking for straight lunette to fit mbt/bantam trailer, have a Ben Hur ring to trade.

Just a nudge Nige regarding lunette, probably could do with housing also as I have the Ben Hur set up if you can help.

Regards

Phil

Thanks for reply`s. Haven`t got the facilities to do it myself but would like to know if you come up with anything Skelly.

Phil

I too have been after one of these early trays but with no luck, I'm thinking of welding the two mounting brackets onto a later model instead. They are a little easier to find.

Phil

I know this subject has come up before but has anyone had any luck with repairing bent rims. I have a few lying around that where too out of true for my jeep so went in the shed.

Also is it possible to rebuild the stud holes.

Phil

Thanks Andy I'll  look into it.

Looking for a straight trailer lunette if anyone has one to sell.

Phil

that`s a bit out of my price range with import duties ect. 

Thanks again for reply. I would not want to butcher it anyway just thinking I could adapt the ammo tray maybe by adding the 

angled brackets. Will have a good search first for an early one.

Thanks for the pics much appreciated, think I may struggle to find one of those trays. Is it possible to attache a later type?

Can someone show me what type of ammo tray fits this mount, I'm assuming it's an early one.

Thanks, Been looking for a while but couldn't find any info at all.

Thanks fellas, does that make it a post war patch

p

Picked this up the other day but can't identify the arm patch. Any ideas?

I'll take the loom if still available.

For it to stall when you open the throttle  means you have a problem in your high speed circuit. The rebuild kits going around are not the best,  the plunger stuck in mine. Also if you changed the meter rod etc you have to adjust it (not easy).

Pm,d

Phil

Thanks for reply`s most helpful

Hi guys, picked up a Bantam trailer recently with markings on rear as 1A 38C C15 can make an educated guess however not really up on markings but would like to know exactly what they stand for.

Regards

Phil

Thanks Pete, I think your right. New ones would save me a lot of time and effort.