ferret
-
Posts
194 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Events
Articles
Store
Downloads
Everything posted by ferret
-
Couple of pics of the tub up on tressles.
-
Pulled the wheels and bogies off today ready for shot blasting.
-
My carrier came from Holland so there is a good chance the axle came from the same source. If you need any bits copying Rik let me know, I have an excellent fabricator and very reasonable. Chris
-
Out to the farm tommorow to remove the wheels and bogies ready for welding at the weekend. We will be turning the tub upside down, on its side etc, so that we get the welds correct. Chris
-
[ATTACH=CONFIG]73758[/ATTACH repair and repaint.
-
Ready for a trip out to a mates farm for the welding. The hull plates are just spotted into place.
-
I have managed to collect together lots of the missing parts such as lights etc. The regulator after a refurb!
-
stripped the rear axle to find its either NOS or refurbed! all new brake shoes etc.
-
-
-
Used a plasma cutter to remove the damaged floor and Hull plates
-
Offered up the new rear axle so we could measure up for the new pieces of hull plate.
-
The 3 rear floor plates were rotten and have been replaced. The control levers were rusted up solid.
-
The rear axle had been removed with a cutting torch, as you can see in the pictures this made a mess of the hull.
-
I started by stripping the carrier completely and sent everything off to be shot blasted so that i could see what we had.
-
Hi, Bought this carrier back in December last year. Started the restoration in January. I was planning on posting the pics as i went along, but didn't get round to it. So here goes with the pics from the last couple of months. I will try to post in order. Enjoy, Chris
-
Almost finished the inside of the cab, just got the rifle brackets to fit. Chris
-
Looking good! Chris
-
Re-fitted drivers door today, so everything is back on the cab. When the rain stops again I can paint spare wheel carrier and fit new made toolbox behind cab. And a name "Edna" after my Gran
-
Hi, Not done much in the last couple of months due to the weather. I have managed to do a bit in the last week or so. I have fitted a NOS stock carb, runs much better. I have fitted the windscreens back in including the newly made one from http://www.rustytrucks.com Paul has done a fantastic job. Most of the outside of the cab is finished. I will paint the interior at a later date. Regards Chris
-
Picture of the door back on.
-
Hi, Have managed to get a bit more done on the Bedford. Has been a bit of a struggle with all the rain. The doors are now repaired and ready for refitting, also managed to cut out and replace the rotten bits on the passenger side of the cab. Got the correct canvas tilt from the MVT Greensheet for £30, Bargain!! If the weather stays dry should get it done soon. Chris
-
Hi Gareth, Found most of the tin work on ebay, you have to keep looking! Got the paint from Warpaint on Milweb. John budgen is good for parts as well. Ask him for the number of the guy who does the magdinos etc, he his very good! Good luck with the resto. Chris
-
I have been doing lots of painting and started getting the bike back together. I think its starting to look pretty good. Chris
-
Hi, Now that the weather as improved I have started painting various parts of the bike, and getting it back together. Some pics of the bike so far. Chris
