Jump to content

TooTallMike

Members
  • Posts

    1,510
  • Joined

  • Last visited

  • Days Won

    1

Posts posted by TooTallMike

  1. I wondered if I'd be spotted! I towed it from Beltring to the Lingfield area via A21 and A25. Thanks Mark for your help with hooking-up and the route :tup:

     

    I've never been back to the site this late before and I was surprised to see how many MVs are still there. The guys with the tractor were still working hard at rubbish clearance and there are still a few tents dotted about! The mud has subsided a bit and actually the ground doesn't look too bad.

     

    On a side note, I'm not surprised things have been going missing: I drove the truck straight in, hooked up and drove out with the Ford on the back without being challanged and Mark drove his Audi in twice without any trouble.

  2. p.s. have got price enquiry with a supplier for Torque rods - still waiting for reply, but can I take it you are now o.k. in this department?

     

    I am still interested in details of the above. Tootallmike may need details as well.

     

    Many thanks N.O.S

     

    Yes, I may interested if you do have any joy with this.

  3. Looking at the wiring diagram it's on the feed side to the switch so yes, you should have lost all lights. Also, 30A would probably have welded your screwdriver to the light unit so I guess it's only hit that one circuit. Sounds like you need to play 'hunt the fusebox' :-(

     

    (that or it's frazzled an already weak connection somewhere, but I'd look for fuses first.)

  4. I'll bet a tenner you won't get anyone in any department anywhere who'll put down in writing what you can and can't do with this. The DVLA, VOSA, DfT etc. all end their emails with something along the lines of "this only represents our opinion and it's ultimately down to you to choose". It sucks because the only way to truly find out is to be a test case, which may hurt. It therefore encourages people to exercise extreme caution 'just in case'.

     

    It would appear from your research into this particular case that there's nothing in law to say you can't drive this vehicle on the road. If you tear the road up you can expect to have to pay for repairs in the same way as if a truck is caught ripping up a kerbstone or whatever. The only thing is, in a tank you're more likely to be identified and traced than a truck which can do a runner much more easily. So I'd say it's up to your judgement whether to do it or not. I doubt a copper will be impressed if you've just ripped up the tarmac and your only defence is to say "...but Kevin at DfT said it was ok".

  5. It's a Families open day for Servicemen, not an open invite, this was confirmed yesterday, perhaps they saw this thread & it caused confusion or they have had a direct invite. :dunno: wouldn't like to see anyone turning up & getting turned away at the gate because they are not on the list... did they take part in the Queens Pageant :dunno:

     

    It's not anyone from here. I don't think they were involved in the Pageant. They're planning on taking a REO, RL and 101. I'll give him a bell and check he knows the score. Cheers for the heads up :tup:

  6. PLEASE NOTE

    I've had a couple of messages about attending this event... Please Note this is a closed event run by the Army, there is NO access for the public or for Forum members to attend with their MV's

     

    I had a call from someone yesterday asking if I wanted to join their convoy to Pirbright. I said I thought it was invite only but he said they were told they could just turn up :dunno: I'm busy anyway so it's irrelevant to me.

  7. Mike - you would earn nearly god like status if you could let me have these as I would make a sectin for these on the site somewhere :-D

     

    I'm already a demi-god :angel: but thanks anyway. :-D

     

    I'll need to copy them out and you'll have to give credit to the book they're from. I'll PM you later.

  8. So what version would mine be then Mike??

     

    It looks like yours has Banjo axles so in its current form it would be a CCKW 352 F2. Have a look at the number stamped into the chassis above the front right road spring to find out how the chassis left the factory. I wouldn't trust the cab plate as it may well have been re-cabbed, re-bodied, re-engined etc...

     

    Chassis number will be in the form of e.g. "CCKW 353 30338 A1"

     

    I've got the series build dates based on chassis numbers if you want to know roughly when it was built?

  9. This may help:

     

    The vehicle designation codes are as follows:

    A - 1939

    B - 1940

    C - 1941

    D - 1942

    (design year)

     

    C - standard (normal control) cab

    F - forward (cab over engine) cab

    U - amphibian

     

    K - Front wheel drive

     

    W - Rear wheel drive

     

    X - special extra lwb chassis

     

    352 - swb (dual spare wheels & fuel tank behind cab)

    353 - lwb (single spare & fuel tank under body)

    A - cargo body w/o winch

    B - cargo body w/winch

    C - stake wagon

    D - Fuel tanker w/o winch

    E - fuel tanker w/winch

    F - van body

    G - water tanker w/o winch

    H - tipper w/winch

    L - tipper w/o winch

    1 - split axles

    2 - banjo axles

     

    Cab codes are:

    1608 - CCKW hard cab

    1615 - AFKWX hard cab

    1619 - CCKW soft-top cab

    1620 - AFKWX soft-top cab

     

    Jack's is therefore a CCKW 353 B1 with a 1619 cab, and Alan Greene's truck in the US is a CCW as it has a non-driven front axle. You can also now see the origins of 'DUKW' and 'AFKWX'.

     

    (info from "The GMC 6x6 and DUKW A Universal Truck", Boniface and Jeudy 1990)

     

    - Mike

  10. A friend has asked me to identify this item with a view to selling it.

     

    It describes itself as a Waymouth-Ross Naval Rangefinder No. 90636

     

    The front is fitted with series of concentric brass rings which can be moved and set relative to each other to establish your height or that of the enemy, and a focusing telescopic eyepiece with a 2-part prismic lens. When you turn the large brass wheel you move a ghost image relative to the full image until the two line up. This I presume is then the range. The dial for the operator's height goes up to 200' so I presume it's for shore-based (cliff-top) use rather than at sea. There is also a thumb operated lever on the rear which pushes up against a small brass sprung stopper the height of which is set via another thumbwheel on top.

     

    There's a WD crow's-foot marking on the rear along with a hardwood handle and a mounting hole.

     

    Can anyone shed any more light on this?

  11. Directional note anyone coming to the show: the turning from Mason's Bridge Road into Kings Mill Lane is EVIL :evil: if you're coming from the East Surrey Hospital end. Even in a Jimmy you need to be on the other side of the road. It's a lot tighter than it looks on the map. I got the Ward and trailer round in one and Grasshopper did it in the long bed M55 but you need to be prepared for it and swing right out!

     

    nb. just obtained 1/4 tonne of extra firewood :naughty:

  12. Do also look at my post in this thread on this subject: http://www.hmvf.co.uk/index.php?option=com_smf&Itemid=38&topic=2684.0. I've been involved in this on behalf of our group since before the public consultation began. The original proposal was for all diesel vehicles over 3.5tonnes regardless of age, and regardless of whether used commercially or not. The final outcome will ironically affect so few vehicles that the whole LEZ will be almost entirely pointless. Most bus companies', hauliers' and local authorities' fleets already comply. It will almost exclusively hit people such as horse box owners and owners of private HGVs. As for the Brighton Run, the HCVS were among many of the parties who participated in the consultation process. (nb. a large number of the vehicles on the Brighton Run are post-1972 so presumably it'll become a Coulsdon to Brighton run for them!)

     

    Ho hum...

  13. ISBN O 85429 860 6 As Tim says its out of print but is much cheaper in the US, I got my copy via the US version of Amazon for less than £20.

     

    This book was updated and reprinted in 2003 in French under the title "GMC un camion de legende" by ETAI; ISBN 2-7268-9323-6. I have both books and I'd say the newer version is better, with more pictures, more colour and most of the inaccuracies corrected. It cost me €29 in FNAC Paris.

     

    - Mike

×
×
  • Create New...