Niels v

Here 

This should be a bit information on the Diesel pump 

Driver's Handbook for Thornycroft Amazon WF/AC6/2 Short by Thornycroft: Very Good Soft cover | CURIO (abebooks.com) Albeit the short wheel base. 
IWM has a couple Find an object | Imperial War Museums (iwm.org.uk) 

I sadly cannot find what museum I bought a copy of a manual from, it was one of the RAF museums.  

10 hours ago, teletech said:

I was mostly thinking it would be nice to have a central library of manuals like Steelsoldiers has for U.S. TMs.

Yes that would make sense 

I dont know if there is a specific place for it, but if the files are not to big they will fit in a comment 

Instruction book driving maintenace repair Chevrolet cab 12 (2).pdf

This is the body relevant pages from the parts book 

The one LWD has would not cover the body work, but the majority of mechanical.  
Though there will be difference since you have an early CGT, from what I remember e.g. the axles and brakes are equivalent to the later 13 cab C30 and not C60. 
These are the "correct" parts list for the CGT, but they only come up for sale occasionally. 
Some of the body work is listed but not shown. 

Parts List Chevrolet C60L-01 - Lwdparts 

Luckily its to wide for Danish roads, so I do not have to give it any more thoughts 

I have been playing around with and online 3d drawing site, converting some of my old drawings of Scammell cab fittings to a digital. and have also included the T towing pole, its still a work in progress, but quite fun to do. 

the drawing can be viewed on the link below. 

SketchUp

Lot 70 - 1918 Peugeot Type 1525 Truck (handh.co.uk) I just spotted this 

This alsojust pop up on Facebook 

1915 Stewart Truck | Kraupie's Real Estate & Auctioneers (hibid.com) Was these used war time ? 

This was listed on facebook earliere this summer 

Guy you will be done at that pace before Christmas 

You are really not wasting any time. Good work 

Good to see you are back at it 

Looks good, specially that battery carrier 

10 year or so ago, I did a 65meter run with my Scammell in second gear pulling a 22ton sliding weight sled with chains and spikes underneath. The newer tractor pullers were quite impressed but I should have used 1th

All well at this end. 
https://www.chevsofthe40s.com/dept/Engine/cat/Engine+Rebuild+Kits.html this might also be of interest 

https://store.fillingstation.com/moreinfo.htm 

https://www.lwdparts.com

And summit racing might have something as well

Hi 

Yes its not the most complicated shape, but you will need a serious bending machine to handle the metal gauge.  

The angle is 104 degrees

And two more