gwrightoy

Yes  they do. Thanks 

OK Richard thanks again for your help

OK Richard thanks. Do you recognise the square headed bolts I have posted up? 

Does anyone recognise these springs. Thanks Graeme 

Does anyone recognise these square headed bolts. I/2", x 20tpi unf.  Hole for split pin in other end. Thanks Graeme 

Not sure what these are for but I have been told that they are not ww2 jeep.  Galvanised underneath green paint. One is slightly different from the other. Possibly marked 1 and 1 1. £20 + post Any questions 07765086115 

No Sorry no more available. 

I thought so Richard and thanks for the reply but I have been told no. They are too thin and mounting holes not staggered. 

Can someone tell me what these grab handles may be off please.  They are each slightly different. Marked possibly 1 and 2..

Thanks Graeme 

New Still in box. Austin K9 crankshaft. I can get it delivered next weekend. £120. Any questions 07765086115. 

Sold 

Not sure exactly what this clamp bolt fits but it could be Austin k2 for the spare wheel or sand track attachment for ferret. Not sure. 5/8 11tpi. Condition is good. £15+post. Any questions 07765086115. 

Yes, as Roy walker used to say its good but it's not right😅

Sold

I have been told that this is possibly the spare wheel Clamp bolt for the Austin tilly or Austin k2. You will have to decide for yourself. Condition is good. Threads are 5/8   11 tpi. £18 +post. 

Not sure exactly about this but could it be for holding a  sand track on maybe a ferret? Or possibly Austin tilly spare wheel Clamp bolt. It's 5/8 x 11tpi so whitworth or unc. Thanks Graeme 

I am not sure exactly what this clamp nut fits but it could be for the Loyd carrier spare wheel or For clamping a sand track on to various military vehicles. Maybe Scammell related. It is 3/4   10 tpi so probably whitworth. Fitted with big brass washer. Small marking beside threads. WH1 I think. Condition is good. Any questions 07765086115. £20 +post. 

Can anyone identify these nuts please. Could it be a spare wheel Clamp nut or sand track Clamp nut. 3/4   10 tpi so probably whit thread. Fitted with brass washers. Thanks Graeme 

Can anyone tell me what these where for. I suspect they might be for a crane jib pin nut or for clamping a sand ramp or a spare wheel on. 3/4   10 tpi so probably whit or maybe unc. I don't know how to tell the difference. Fitted with big brass washers. Thanks Graeme 

Sold

Not sure but I think it's the differential that you would need to change. OB bus diff would be good. 

I fitted an overdrive from. Andy Usher. It helped on the OY which I think had a 7.4 :1 differential ratio. Message me if you want anymore info. Regards Graeme 

Suitable for the MW OX and OY. New old stock. £15 +post. 07765086115 

Last one. New old stock K9. Front Spring Bracket Rear. £20.+£3.20 post. Thanks Graeme 07765086115 

Can anyone identify these new well greased up parts. Some kind of flange with threaded insides. British related I presume. Thanks Graeme