pigdog

By the way, the black paint on that upper pipe burnt off after 5 miles :-) It's now looking white!

I used a flameproof ceramic paint on the pipes and an engine paint on the fishtail. The paint on the fishtail is burning off after 1 drive. I could have used some NOS elbows. Mine look like they had broken corners welded back on.

Postage would have killed on those.

-C

My exhaust elbows had the 2 nuts on, and in the parts manual it shows them that way also. I see youre pipes still have the original black on them. Mine were all rust. Looks good.

-C

Got the manifolds and exhaust back on and the coolant hoses replaced. Just in time for the British car show this weekend. Thanks to all who helped out walking me through the process. The pics are after/before

-Chris

Ferret 00 EC 55

Thanks for the info and links. I will check them out.

-Chris

Would listing it as "display only antique" be ok with customs? the c13 dates to the 50's dose'nt it? Is this a rather "new" law?

-Chris

I have bought items off E-bay from England to the US and have never heard of needing an "export license" for the parts I'm buying. Bought a clansman harness box, and also alot of spare Ferret parts.

I'm looking at getting some Larkspur parts for my C-13 radio in my Ferret. Does the seller need an "export license" to ship to the US because they are considered "Military parts"????

Thanks-Chris

well I'm throwing in the towel. I was able to do the #1 and 3 tappet, but the locknuts on the rest are stuck TIGHT and I cant get them undone. I've wrecked my hands/arms in the process. I guess 2 is better than none.

-Chris

Matt,

I guess thats what I was looking for was a description of adjusting the tappets. I'm redoing the coolant hoses at the moment, but will atempt to do the tappets then.

Thanks much

-Chris

Matt,

Good job with the tappets! I know all mine must be tight cuz I cant get the gauge in anywhere. I will take out the plugs so I can turn the engine. I thought they only need 2 spanners? What size are needed?

Do the spark plugs have a torque setting? I cant find any info on that.

Thanks-Chris

got all the hoses off. I cant get the cylinder block drain valve pipe off. Its stuck.

Will I be able to get the hoses on without the drain pipe off?

Thanks-Chris

Is that the screw on the side for the alinement? or is there another location?

Thanks for the advice. The problem is getting that "other" person. (the wife) to help turn the engine. Its like pulling teeth to get her to help out. I told her before it would be "fun" turning the engine with the crank. Its like those garden windmills or an organ grinder with a monkey.

That somehow didnt sell the idea to her.

-Chris

Andy,

Thanks for the tips. I was able to get the rear plate off last night and will attempt to put some hoses on today. A note to others is that the thermostat part is aluminum so be VERY careful getting it off. I didnt know that.

Question: Can the thermostat be removed without the special extractor tool? I have a new thermostat just in cause.

Thanks-Chris

How did the tappets check out?

-Chris

i take it you have tried the old trick of putting the new hoses in boiling water to soften them prior to fitting

No I havent...but I will :-D

Thanks

Ive been to the Ferret site and thats where I read its an... "easy job". I guess I wanted to know is it possible to leave the bottom 2 hoses (the drain plug and bottom rad) alone and replace the one next to the pulley WP without removing the rear hull?

I didnt realize that the pipes on the ferret are so close to each other. I thought it was more like a car where theres a big gap between pipes so you can attach the hoses without pulling everything apart.

If I disconnect the the cylinder block drain valve pipe at the bottom, will that allow enough flex to be able to get a hose on?

Thanks-Chris

I'm thinking I'm going to leave them alone so I dont screw them up.

Thanks

Trying to change the coolant hoses which looked all bad on the outside, but after cutting them off they seemed brand new inside. So I just discovered I have made more work for myself than needed. How do I get the downtube from the Thermostat to the water pump off? I assume I remove that to get the replacement hose on then reattach it?

Is there also a way of attaching the hose from the WP to the rad bottom without taking off the whole back end and rad of the ferret??

I think I should have left everything alone. :mad:

-Chris

Ferret 2/3 00 EC 55

Ok. I have the manifolds off and painted and just have to finish painting the exhaust and put it all back on the engine.

I should check the tappet clearance, but have never done it before, so I'm thinking about giving up on it.

I know they should be checked cold and have a .015 gap. I have the timing mark at TDC. Is that for the #1 cylinder? Then how do you find TDC for the rest of the cylinders? Are there timing marks for all?

Can someone explain the process of adjusting? Is it loosening the top nut then adjust with the bottom?

All my manuals donts seem to cover this at all.

Or should I just leave them be since I dont know what I'm doing and avoid messing it up? The engine seems to run fine.

Thanks-Chris

My inside hull exhaust looks like 2 of the hole corners were broken at one time and welded back on. I know what you mean by a slow process. I also need to replace my old coolant hoses. I moved my radio sideways to get a view of the timing hole. My ferret is missing the timing pointer.

I was trying to get some help on the exhaust tappet gap check, but so far I'm stuck. I painted my mainfolds yesterday with a flame proof black. Matt are you getting the other parts of the exhaust machined smooth?

-Chris

Nice to see a color movie of a ferret. Thanks

Thanks for the help. I was able to get the last hull exhaust off yesterday. I need some new bolts. Only 2 were the proper size. The gasket sure was a flakey mess.

-Chris

Thanks for the pic link. Mine had some marks for "early timing" also. So the TDC is for #1 cylinder? Then how do you find TDC for #2,3,4,5? Then #6 would be a full 360 turn?

-Chris

Since I have my maifolds off I'm trying to check the exhaust tappet gaps. Does anyone have a pic of the flywheel timing mark? Mine is hard to read thru all the flaking paint. When it says TDC what cylinder is it for? #1 or 6? My ferret is missing the timing pointer bolt. Can a timing light be used? Sure was a pain jumping in and out rotating the engine and looking for the mark. Trying to look in a mirror and get at the tappets is quite difficult. I still dont see a gap.

Very confused

-Chris

Ferret 00 EC 55