-
Posts
480 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Events
Articles
Store
Downloads
Posts posted by protruck
-
-
looks like a Kent-Moore number.
Clive
..............................
protruckservices.com
-
i think every thing on them is torqued. it just looks familiar. but the old grey matter is not getting any younger and i could be wrong.
Clive
...................................
protrucksrvices.com
-
It looks like the core plug remover in the middle of the 8V 92 detroit block.
-
injector pipe spanner
Clive
......................
protruckservices.com
-
Hose cutting tool
Clive
.................................
protruckservices.com
-
Or may be removing it.
Clive
-
Hi woodchips. The rear brake servo's on your vehicle are the standard DANA position for the SD66 rear Axles, the same as the DROPS vehicle.its nothing to do with scammell engineering
The warning light problem maybe the switch's on the diff lock servo's being corroaded or the pins in the electrical boot connector.
Hope this helps.
Clive
..............................
protruckservices.com
-
Good news. hopefully won't have to change for a lot more years now.
Clive
..............................
protruckservices.com
-
Hi Andy. I use one of these they are much better than the other type with the butter flys.
www.frost.co.uk/productlist.asp?catId=14
You can get the extra flaring parts up to 1/2"
if you ask. its not cheap but its better than messing with the others.
( just my opinion )
the only down side to these is you need too use them in a vice.
Hope this helps
Clive
......................................
protruckservices.com
-
Good luck nick . Keep us posted on the outcome.:-(
Clive
.................................................
Protruckservices.com
-
Great pic's. thanks for sharing
Clive
.......................................
Protruckservices.com
-
It would be the only prototype that scammells built. It is now in private hands.
-
Get well soon.
Clive
-
Nice one nigel.
now all the fun starts over the winter.
Clive
-
Nick. The flange puller with 3 legs can twist the flange( been there, got the tee shirt )
If you can get a spare flange it looks like a 1700 series and a centre from a puller and bolt, and make a puller. the thing with using all the flange bolts you spread the load on the flange equally. hope this may help. It's what i use now. broke too many pullers
-
Thermal imaging bins.:confused:
-
Hi and welcome. Enjoy
Clive
-
Hi Robert. Welcome to the forum. enjoy
Clive.
Protruckservices.com
-
Hi Mike. Your lucky with the police in cadiz thay are a right pain in the A$$. Glad i'm back in the uk now. 3 1/2 years is just to long but some realy nice people there. I'll have a word with my friend who is still out there because I remember him saying about the tank.
Clive
-
Front axle weight unladen 6,554kgs = 6.45 tons
hope this helps
Clive
-
nigel 9-10 1/2" tall X 24-3" long x 9-6" wide 15,038 kgs hope this helps.
Clive
-
Hi Martin, and welcome. looks like you've got your hands full and need a
large place to do that lot in. plenty of people here for info on the commer.
Clive
-
Try this link. http://www.nato.int/docu/stanag/4101/sta4101e.pdf
hope this is of some help.
What vehicle ?
Clive
protruckservices.com
-
If its 5/16 kunifer brake pipe your after try ebay I payed £25 for 25ft. Not
to sure if this is a good price but it got the job done.
Clive
Mystery tool No.2
in Other Chatter
Posted
Not too sure mike, its a long time since i've had a blower of a jimmy and can't remember what the top looks like, but i can remember the plug has the two dowled holes in the top, and that you can't get a spanner in the vee. I may be completly barking up the wrong tree.![:(](<fileStore.core_Emoticons>/emoticons/sad.png)
Clive
..............................
protruckservices.com