pawelcen

I thought so too. The pump will not fit: screw head, bracket plus 10mm. This will go into the pump.

These are copies from England, i.e. from India.😵
Nothing fits. The one at the top has a dimension of 510mm from case to the end.

Hi Ron,

thank you.

Yes, the rear chain has 90 links and the primary chain has 74. I think so, I will count on Monday.

Dimension L is 5 7/8". I need modify.☹️

Regards

Pawel

It looks a bit bad to me.
I think the bar on the mudguard support is too high.
What is the distance L from the bolt axis to the crossbar?

What is the distance A from pumps. In mm or inches, pls. 😀

 Pawel 

I do the opposite.🤣
Did you know that the French used their thread system? I read about it, but I don't know what the difference was compared to DIN or BS.
Fun fact.

Pawel

Thank's Ron.

I use inch, feet, galons etc...😁

Thanks Ron,
from the case to the end, one is 51 and the other 52 cm. 🙂
The total length is 57 and 58 cm.
Unfortunately, the mounting holes do not match.
Always uphill, not easy.

Pawel

Hi,

another problem is the upper chain cover:
I have 5 pieces. Two gray from the top bought on ebay.uk from one seller two pieces. Each is different.
The next two were bought together with two motorcycles.
The fifth downstairs was added as part of the motorcycle. These three are identical but modified.
Unfortunately, these new copies do not match Triumph. They are too long and are too high after screwing.
Can these three lower be from Triumph?
Regards

Hi Ron,

thank you  for helping me with the wiring instalation. I am doing according to your suggestions

Quote

I also slightly modify the wiring by taking the Regulator “A” wire directly to the ammeter then a wire from that terminal on the ammeter back to 3 on the light switch. 

Could you please size the rear brake rod? Mine is 510 mm long and ~6.7 mm (?)  in diameter. I think this is a post-war modification.
Was the diameter 1/4" and the thread 1/4"x26tpi?

Pawel

Thanks.
The purple tube has 4mm on the outside. I made a 6mm conical brass rod which I heated. Then I pulled the tube over it and dipped it in cold water. The larger diameter has stabilized. She mounted the cable without any problems. When heated, it behaved like a regular heat shrink band.
New patent.

A large one with a diameter of about 12 mm, after heating, shrunk to only 6-7 mm and that's it.

Thank you very much.
Maybe I'll leave it in inches. My turner already likes them. 🤣🤣🤣

Pawel

Hi,

I used a Belzona repair kit. 

Pawel

Thanks Ron.

Hi again,
Regulator connected. Now I'm looking for the purple marker. I have two diameters, one too small and the other too large.

It's time to install the front brake. I need to make a copy of the special bracket/bolt/nut as in the photo.
I am missing external dimensions such as:
L- length
H - height of the spherical part
R- diameter or radius of the sphere
D - diameter of the cylindrical part.
I would be grateful if someone would like to help me.
Pawel

Thank's Ron.

I thought so too. 

Pawel

Hi, 

next question. 

1. Green/black, left or right is correct?

2. The left one is red/white or white/red? 
    😁

Does the order of markers matter?
Theoretically no, because they are not repeated.

Regards

Pawel

Thank you. 😀

Green/black between regulator F and dynamo F in wiring diagram W2049.

Pawel

Hi,

thank you all very much for helping me rebuild my bike.

Unfortunately, I didn't buy petrol taps. The seller did not respond.

I took care of the wiring and did as Ron described.
I have a question about cable color marking. Is the side by side version for green/black correct? Just like in the photos from Lex. Or maybe the one with the black stripe on the green one?
Regards
Paul

Thanks Lex.

Pawel

No 9? 🙂

Thanks.
Is it number 9?

Pawel

For now, I'll put on the sliding chrome one at the top of the photo. I will look for the original.
Pawel

Hi,
I bought a Lucas dip switch.

Cheers

Pawel

Hi,

I'm sorry I haven't spoken for a long time, but I had family problems.
I have a question, what fuel tap was used by the Triumph factory?
I have several and I don't know which one is right?
I think it was only two-position?
Regards

Pawel

Hi,
Is a junction box installed in the bike as in the W2049 wiring diagram?
Is it the same as for cars?
For example: https://www.ebay.co.uk/itm/186128449713?hash=item2b561ec0b1:g:sRUAAOSwuZllEac2&amdata=enc%3AAQAIAAAA4CEo6geCrzh4kAG8Gy7I9308cL%2BoHlVoMSoSez2k5lEaVeeGzLHMOyWjZBdpgfbvznbDhXTtVxOLQNr6k%2FimuJ%2BgbhLEZtwMmgOnPl4tDjiz5igNwy3ovrbDwKt4BnvbgqL35e3P74NfeIA5L%2BNKTFo78hKFSsBwL0wLSl%2FC8LPnr4JVounccZm6TcweYD%2BOA4pdOp0AngB355BzRL6WI4N8UO9p0KUFeW9laD0eYpbfyHtF5NoNhRe0XXd6ieKpXOuZYzBY2A3PmD1VzN96oBf137v%2FqiGzFN7hC7ZAmG8d|tkp%3ABk9SR4D_p8TxYg

Cheers

Pawel

Thank's Ron .