-
Posts
4,971 -
Joined
-
Last visited
-
Days Won
28
Content Type
Profiles
Forums
Gallery
Blogs
Events
Articles
Store
Downloads
Posts posted by Great War truck
-
-
Just as long as it was not pollyfiller!
- 1
- 1
-
-
-
I think Bobs FWD is a Kissel. Same model B FWD.
- 1
-
Well, they built 997 FWD Model B under licence by the wars end. I believe that they also provided some ambulances to Russia and Serbia but in fairly small numbers.
-
14 hours ago, alsfarms said:
Here is a picture dated 2009. This Riker truck was part of the Archie Crippen estate auction in Fresno California. Does anyone here have any idea where this Riker truck is now and who owns it? This picture was shared with me on the "Just Old Trucks" forum.
Al
I had known about this one for a long time, but was always under the impression that it was in France. US does seem more likely though. It makes you wonder what else is still out there waiting to be rediscovered.
- 2
-
-
First Brake Drum cleaned up as far as possible. Hopefully the remaining roughness on it will not tear up the Brake Linings. The second drum almost completed as well but there is less metal in that one with no real provision other than to take off a gentle skim. End result should leave it no worse than this first one.
-
On 7/17/2020 at 9:41 PM, Cel said:
Not sure whether these are WW1, I think later. Anyone ever heard of the 'Truck and Tractor Appliance'? This is the only link I can find on the www: https://www.britainfromabove.org.uk/en/image/EPW034851
My friend took the pictures last week, he thinks it is a front (steering) axle.
Thanks
Marcel
Never come across this name before. Some piece of agricultural equipment i suppose?
-
On 7/19/2020 at 10:42 AM, Runflat said:
The tipping system looks similar to a US Heil tipper. The Berliet even with a second for spares looks like it will be a lot of work.
-
On 8/12/2020 at 7:37 AM, Niels v said:
A 1915 Latil is coming up for auction https://www.artcurial.com/fr/lot-1915-latil-type-tar-serie-p-no-reserve-4076-67
That looks quite nice. Not sure about the cab though.
-
With the Rear Wheel Brakes and linings now completed as far as we can go - short of hanging them, we now turn to the Transmission Brakes. These two Brake Drums are heavily corroded, pitted and grooved and we had those sand blasted some time ago. They need to be skimmed but there is not a lot of metal there and it looks unlikely
that we shall be able to turn off all the corroded parts. We may just settle for removing the roughest bits so that they do not tear the linings and leave them at that.
The Drums are 14" in diameter and 4" wide - they will just go into the gap on the Colchester Student but it will be very tight - the gap is also just 4"!
The first one has been set up on the face plate and a first cut taken. -
-
A nice looking thing. In searching for a chassis, how have you looked so far. I would like to think that there must be a survivor in the USA, but our hunt for Peerless trucks over there drew a blank.
- 1
-
Guy, a forum member put me on to a recent auction in case there was anything there that caught my eye. Something most certainly did, four Peerless front wheels. I put in an on line bid and was delighted to see that i had won.
I drove up yesterday to collect them and take them down to Devon. A round trip of about eleven hours but we are very pleased with them. Two wheels are in outstanding condition, while the other two are ok. Quite amazing that this stuff still turns up.
- 11
-
-
-
Dad was back on the Peerless today. The four Rear Hub Brake Linings have been riveted to their corresponding Brake Liners and these four sub assemblies are now ready to be attached to the Brake Shoes. They are to be attached with 5/16" csk screws which go right through the lining and liner and are nutted on the inner face of the shoe with slot nuts.
- 1
-
I quite like that. I wonder what speed he can get up to?
-
Yes, thats right. The original radiator would have been brass but was replaced at sometime with something else - not sure what it was. Simons Dad made a new one from brass. There seems to have been five different radiator types and you can approximately date it from the rad design.
What do you have for your Riker? Is there any chassis at all? Gearbox. Axles? Wheels? Starting of with just an engine is probably no worse than what we did with the Thornycroft. It can all be done if you wait long enough and are very lucky.
-
If you click on this link it should take you to some more photos of it, including another one of it as a house:
I think it sold in 1975 and it was restored by Simons father. I am not sure how long it took but he is obviously a very capable engineer and it comes out to events quite regularly.
-
Thanks. It was a remarkable journey. The MVPA recreated it with modern and a WW1 Dodge which i understand completed the trip without ay problems.
-
-
Queen Alexandra's Imperial Military Nursing Service
in Pre WW2 vehicles
Posted
A fascinating story. Thanks.