ianevans

I took an Abbot to Ireland .but put it on a low loader  to ferry drove it on and off ferry and onto low loader at other side .

are they the same as a stalwart

Hi All. does anyone know if the small fuel tank with the fuel pump in the hull floor is  the same in petrol mk1's and diesel mk2;s

thanks

Hi All, Is it ok to use E10 in my CVRT J60 or should i switch fuel off and let carb run dry every time i use it

Hi All , I am looking for 2 RHS road wheel studs for a chieftan

Hi do not mix ac123 go to DLB with continuity check and find cables that way .sounds like you need to check batterys

Ian

Hi All , Looking for the  front stowage bins for my Sabre

How warm did you get engine .ive seen one that blew oil out when cold but once was hot ran ok, still used a wee bit of oil but nothing too much . how much oil are you losing anyway . i've a friend who got pistons and liners ex sweden and rebuilt his abbot without to much hassle

I made my own by measuring and by guess work . works fine and done quite a few pack lifts both abbot and 432 . mostly out of 4x2 box

Hi All , am looking for a wiring harness ,for my 432 the one from the DLB to the pack , if anyone has or knows if one is being broken

thanks

Ian

Far as i'm aware a complete track weighs in at 1.5 tons

I had similar problem ,turned out to be a generator which had seized and prevented engine fro turning ,best to check with either large adjustable or a 55mm socket.either problem will require pack out

Hi Does anyone know who was selling chieftan GUE  awhile back. i seem to remember an advert on milweb with someone selling them .

Hi All ,

Wanted.Chieftan fuel pump ,not the one same as 432

Hi I would also suspect carb diaphrams also the ballast resistor and main HT lead

I have towed mine about 1/2 mile slowly with no side effects . drove perfectly well after .

I always disconnect pipes as i lift . don't forget throttle linkage and tie it to side so it doesn't fall down and get broken

Hi, i have  a couple that may interest you ,not road registered though . PM if you can't find any

Hi , Sorry been busy , have taken 2 pics if you pm me a number then i will whatsapp them to you

cheers

Ian

On 7/25/2019 at 5:44 PM, Fox Bradley said:

Has anyone got a transit Box for a .50 BMG HB for sale (Barrel off type).  original or Good re-pro, anything really will do....

And also a box for the tripod.

I have had one on order for 7 months now from a well know WW2 Box supplier and despite sending detailed measurements and photos and a promise of 4 to 6 weeks delivery it still hasn't been made !!!!  Why do some people make simple things so difficult ??

Cash waiting and can collect, it will soon be the end of another season and the Dodge will be going away for the winter.  

hi yes i've got 5o cal box contact me next week

Hi , I would like to take them are you near Hexam, i could get them picked up there

,,,thanks

  ian

Hi Do you still have these wheels and where are you

thanks

  Ian

Hi Are AEC militant wheels any good

Hi Terry,    many thanks for that will look into it .

Does anyone know where i can get the drivers hatch covers made . i can supply covers as a template to copy or has anyone cast them themselves .

  Thanks