diamond t 1

Thanks for the advice , will have a look over the weekend when I get to the truck , From what I have read, it seems that the pedal going to the floor is normal . When the pedal is pushed I will have a look at the gauge on the dashboard and see what it does . There does not seem to be a leak without the pedal pressed , and when the pedal is pressed you hear the air as the brakes are applied , but this sound continues until the pedal is released . Sounds as though there maybe a diaphragm gone or a leak between the pedal valve and 1 or more chambers do You think. Thanks again Diamond t 1

Hi All getting ready for new season and took truck out for a run round , started ok [after battery charge]and seamed to run good ,cannot remember about the brakes though . They work fine , but pedal goes right to the floor , and also it hisses all the time the pedal is pushed , and I cant remember if that was how it was last year . Any advice gladly received , or any other Diamond T owners comments on their braking system.:undecided: Thanks Diamond t 1

You mean they have more big motors as well,,Lucky Chaps Cool club Diamond t 1:cool2::cool2::cool2::cool2:

Thanks for the photos,quite a convoy I saw a Champ,a Jeep,2 Diamond T [1 of each wrecker and ballast tractor],a REO,2 Scammells [Pioneer and Contractor[i think]]Austin K9,International of some sort and a Ward La France .Must be a decent club to be able to get that sort of turn out of Heavy Motors Diamond T 1 .

Lovely day today, taster for what is to come hopefully,That Heavy Run sounds great,any photos available:-D Diamond T 1

Hi All I have a Diamond T b969 soft cab and I am ready to fit the side curtains to the cab sides,I read in the manual that there should be some bars that thread through the rear of the curtains and fix somehow to the doors,I think I am missing these bars and was wondering if anyone has any hints/clues as how to fit the curtains and any pictures/measurements for the bars.So I could try to fabricate some.Thanks for any help You can give Diamond t 1

Hi Everyone,I live near Cambridge and have a Diamond T wrecker,I am restoring it and have nearly got to the stage when it will be on the road. Diamond t 1