-
Posts
36 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Events
Articles
Store
Downloads
Posts posted by GSYBSA
-
-
Thanks Chris for the info
I wasn't aware of the "full width" Model G bracket, I actually have two frames with both early and later regulator support brackets but nothing assembled yet. Both forward frames of mine have the battery support bracket only "half width" as such.
I always assumed the Model C frame bracket wider then to support the toolbox. That is my question about mounting the toolbox on a later frame WDCO.
Best Regards
Rick
-
Can I direct you to Jan Vandevelde, who has a register for Royal Enfield's and literature beyond belief. wd.register(at)gmail.com
Jan will also be pleased to add your bike details to his register.
Here is a page from his excellent report and an expanded extract from my own workshop manual. The rectangular toolbox was deleted after the first contract for WD/CO's. Personally I didn't like the horrible gap it left, so I fitted one anyway. Ron
Hi Ron
I assume on your frame the mounting rails had been removed also for the rectangular toolbox. Can you post a picture of how you mounted the box.
Thanks
Rick
-
Hi Nick
If you don't get any joy with the spindle, I will get mine copied for you.
I've made contact with Ted as well, this could turn into a small WDCO appreciation group:D
Regards
Rick
-
Hi Simon
Thanks for the info, I've dealt with them before. It's going to look awesome in that colour. I have a long way to go with the bits I have but always up for a challenge.
Regards
Rick
-
Hi Simon,
Do you mind if I ask you where you got the paint from, hopefully going to start my CO project soon.
Rick
-
Regarding the Mirus Battery, there is some information on firing in the book "Mirus The Making of a Battery" by Colin Partridge and John Wallbridge. Will try to ask around for more info.
-
Till the next Muratti! :cool2:
err..ermm...yes bit of a sore subject and as for the rugby don't even go there:embarrassed:
-
Hi Rick, does this mean I'm being ganged up on? Again!
Against a Jerseyman.............never;)
-
Hi Ray, been meaning to join this forum since then but could never seem to get round to it. Yes it was good to meet you guys from the North Staffs, that was quite a week, shame it could have been a bit warmer. Hope to do a big one again in 2015. Like yourself my bike still had wet paint on it that week but it made it through. Say hello to the guys up there from us on the rock.
Rick
-
Hi all
Am new to this forum so had better intruduce myself. Am based in Guernsey, Channel Islands, those of you who ventured there for the liberation celebrations in 2010 probably bumped into me, probably in the bar.:-D
Rick (GSYBSA)
R/Enfield WD/CO Tools and tool rolls?
in Motorcycles
Posted
Thanks Chris and Ron for the info.
I have an identical toolbox with the knurled knob but I think one of the brackets is mounted differently.
Will just have to use that artistic licence.
The bike looks better with the box fitted.
Best regards
Rick