Sinaimears

Hi, Does anyone have the ratchet part of the Hand Brake for sale or know where I can obtain one it's needed to pass MOT, Cheers ! :undecided:

Hi, Speedo was Posted Saturday

Hi, Sorry about the HOOD but worked with the 101st and 82nd for 3 1/2 years and seemed to have been Armericanised if there is such a word, as for the item mentioned I'm sure I have but will once again try a photo to make sure it's the correct item. Dave

Hi All, I Apologize to the person who asked if I had any Gauges but I seem to have lost the message:cry:, the only one I can find at the moment is a Speedo if that is of use to you:-D Dave:writing:

Hi John, Some good news and bad news the retaining ring is missing but the good news the Hood seem's in good condition. Please check photos:shocked: Dave

Hi John, The store that I have the spares in are a couple of miles from the house so I'm not down there all the time but I will check the next time I am there. I do know the Wheel and Columb are attached and horn is there but cannot swear that the part is there but if it is it's yours. As for the Hood I dont have any plans for it the only problem would be getting it to you from South West Scotland,what I will do is take photos of it and you can decide. Dave:shocking::shocking:

Sorry the only two body parts are the Windscreen and Bonnet also bumper otherwise you could have certainly had it no problem Dave;)

Hi Andew, I managed to obtain a Gasket from Germany and it arrive a couple of Days ago. The Mechanic who is REME TA with his own repair shop took the spare engine's head off and recons with a replacement gasket it should be OK fingers crossed. Any info would be appreciated, Dave

After removing the Head and seen the results it's a good job that I took the offer of a Stack of spares just arrived from Germany it included a spare Engine after a check by a Mechanic it was given the thumbs up. Amongst all the spares for £150.00 was a complete windscreen ,Gear Box, Hood, etc. There was boxs that I have not had a chance to check out yet. Dave:D

Hi Andew, Did send e-mail just checking to see if you received it ?. My Address is david@dmears50.wanadoo.co.uk This was condition of block and pistons when head was removed,when I picked this up in Edinburgh I drove it 30miles before it finaly gave up the ghost. :-( Dave.

Hi Andrew, Can I please call upon your knowledge of the Munga. Could you please give me the Torque setting's and sequence to tighten the Cylinder Head and any other Torque setting's I might need for a Cylinder Head Gasket Change, Dave

Cheers! Much appreciated, Dave,:readpaper:

Cheers Andrew! It certainly does although siting behind the wheel is a little tight these days is there any way to ajust the steering column / wheel the seat is as far back as it goes. Dave

Cheers ! John, Confirmation of the info I had is appreciated, Dave

Hi All, In the photo of me seated in Berlin next to a Munga in 1965, in the original photo there are 4 Vehicles two either side. I have now recentley purchased my own Munga 4 my problem is Fuel I know there is a Fuel Tank and a Two Stroke Tank, my problem is do I need to add a lead additive to the fuel tank or is unleaded OK. I was told by the pearson selling me the Munga that I did not need to add the additive ?. Can anyone HELP. Dave.