-
Posts
668 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Gallery
Blogs
Events
Articles
Store
Downloads
Posts posted by rog8811
-
-
-
This has to be something to do with the problem loading pages a couple of days ago, something has been reset.
- 1
-
I have now managed to bring together all the AJS parts I can find, I will attach photo's below. The only major piece that did not appear was the gearbox, who knows what happened to that! Any other help with ident would be welcome, where would I find frame number if that would help?
I am going to sell this, if anyone here is interested let me know, otherwise it will probably end up on ebay.
-
I am clearing out a garage and have come across a Godiva pump in bits, I have no idea how complete, but here is what I know.
The engine is in the carry frame, all manifolds and fuel pump are off but are present, the mag/distributor is fitted. I gave the handle a tug and the engine turned so guessing it is free.
I have found the bronze pump parts, a few gauges and various tins in fair condition.
Also water tank and I think fuel tank.
I have no idea of its value but I need it gone, it is part of the estate of my late uncle which I need to get settled.
I have one picture at the moment.
If any one is interested in petter, lister and other engines there are a number of those in the garage too.
-
One of my favourite Trucks, keep the photo's coming please.
-
Many moons ago I posted on this thread that my uncle had a climax pump, well he died recently and I have the job of sorting out his affairs, I have found most of the tins, water tank and fuel tank.
The engine has the magnito fitted, carb and exhaust manifold are off and not yet found but there is so much stuff to go through.
I will probably be looking to sell the parts once I sort them out.... that is if I can resist the temptation to get the engine running
-
Hi chaps, I have been got the job of clearing out a dead relatives garages, I had an idea of some of the things to be found including a motorbike.
Sadly like everything else in the place it is in bits but at least the engine appears to be more or less together, it is an AJS 350/500??, not sure that is why I am posting.
just 2 photo's today that may be no help at all but anyone recognise it? I am pretty sure the flywheel is from one of the 3 lister engines in bits not the bike
-
Next instalment
- 1
-
Good to see you are still moving forward, keep us up to date please.
- 1
-
I follow this guys escapades, usually tractors and such but this time around it was about matadors, always a favourite of mine.
- 1
-
You may end up having to use a bit of heat for stress relief but going by what you have done so far I don't doubt you will sort it.
- 1
-
I don't comment much but I, like so many, look forward to any updates on this fantastic project.
- 1
-
-
10 hours ago, ruxy said:
always best to get it on a shadowgraph
That takes me back, 50 years ago, Guildford tech was the last time and place I used one. But brings up a the thought of where to get access to a shadowgraph should you want to check out your thread.
-
Mummy was rescued from a dilapidated storage facility that Bensons used in the next village, about 2 miles from me, and last seen 3 or 4 years ago in the small yard half a mile away so fingers crossed she still exists.
I think the Bensons showtrac may have been in the same shed as I see that has reappeared in the main yard looking very much the worst for wear.
-
I am soon to retire and have for years promised myself a Scammell R100, I do not have either the space or the facilities to go full sized so I have "gone ride on/in" . Furlough made me re-think the start date and as I am about to return to work I thought I would post my progress.
This will not be to millitary spec but as reused by my local fun fair family, Benson's of Dorking, I have had a fascination for this truck since my school days when I used to watch them being used to nose trailors in and out of the yard.
- 1
-
It may not be traditional but how about WD40 on the hoses, I used it on my old SER 2 rad hoses to make them look nice.
Picture of your tanker, brilliant, a very talented lass.
-
Fantastic work as always, Are you 3D printing your plugs and knobs?
-
You do know we will need lots of pictures?
Oh, and welcome to the forum
- 1
-
Fantastic!
-
May just be me but I cannot get the videos to run, would like to see them though
- 2
-
When i was in the steam engine phase of my life we always refered to the brass and bronze bits as the jewelry, there is some lovely bling there!
- 1
-
I fascinating set of photo's thanks for posting them.
-
Hi, Welcome to the forum, all interests are interesting to us on the forum, fire away with the pictures!
As to the film you mention I see only clips on YT but you never know someone here may have some info.
Garage find motorbike
in Motorcycles
Posted
The AJS has found a new home!