Ausprey
-
Posts
71 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Events
Articles
Store
Downloads
Everything posted by Ausprey
-
After sorting all the templets and measurments i started to do some brackets and missing parts. Next week i will receve some parts for the cs8 and continue reproducing. Any comments goodor bad are welcome i can learn from you and i will be pleased thank you all for your knoledge
-
This week i went to gozo to take some measurments and some templits to reproduce for my cs8 that are missing ,i would like to thank alan for letting me measure bits that i do not have , many brackets in engine bay and driver side ,and i would like to say big thanks to aii of those help full people who helped me with parts and knolidge and measurments with out you i could not continue the restoration .
-
these are 2 photos to show what i need thank you
-
does any one have 2 mails and 2 females for sale that are in the end off the stays that are from the bulk head to angle iron in engine bay over engine i am posting some photos off them they are used also in hand brake stays any help will be appriciatod thank you ass always .
-
some more parts are sand blasted ,etc prime and under coat . petrol tank brackets are ready to be blasted and sprayed engine liners found from malta , today i went to gozo to take some more measurments in engine bay breackts . hope to do some more work in christhmas holidays and waiting for some parts we bought ,i would like to say thank you from my heart for those who sold me some parts and more to others that send them even free.
-
Hi does any one no where I can buy engine Mounting or if there is replicas or what Type should I use as the rubber is not Good thank you
-
Some more work during the week end till i find some parts and diagramms and measurments for the body to re manufacture i decided to start putting back togeter the transfer case , and gearbox , bought some new bearings and oil seals and made new gaskets , i welded by cast iron a piece off the transfer case that was broken ,does any one have any photes or diagramm of the mountings fromm the tranfer case to the middle cross tube as it has the reduction for the compresser any help is appriciatod.
-
hi all last week i continued some work on the morris,dismantell the petrol tanks and trays they need to be new the straps are ready and radiator strips support ready ,not so much time after work.
-
Hi i do not want you to go in that trouble but if i arrange for a currier to pick up from your adress would you sell me some parts for cs8 after you receve the payment best regards mario
-
hi any luck for a self starter and an acilirater pedal,front springs brackets and shackels front spring u bolds and center bolt plates even if they are with wear and thear at least i will have a patern to do them thx
-
Hi all does any one no from where I can buy engine Block liners also I need front spring hanger and brackets That are bolted to shasis at the rear of the front springs And the centre bold plates and I holds Even with wear and tear as I do not have them even to copy thanks for your help mario
-
it is a 1940 cs8 with 6 cilinder engine euroscreens
-
i live in malta europe we are still with shorts and t shirt
-
hello all i maneged to find haw to send some photos with the help of JEREMY TOBIN thaks jeremy it is haw i bought it and a little bits off work done i appriciate all your comments and your expirense thank you any one have any parts for sale please tell me .
-
HELLO I LIVE IN MALTA EUROPE CAN I GIVE YOU MY E MAIL ADRESS freetime@go.net.mt CAN YOU TELL ME HAW MUCH YOU WANT FOR THE STARTER AND IF YOU HAVE ANY EXTRA PARTS FOR SALE I ALREADY BOUGHT SOME PARTS FOR THE CHEVROLRTT CANADA FROM AUSTRALIA THANK YOU YOUR HELP WILL BE APPRICIATOD HOPE TO HEAR FROM YOU . BEST REGARDS MARIO
-
Hello can you send me your a mail Adress I need parts or I have to send The cs8 for scrap which I am trying Not to with some help thank you very Much .hope I here from you thx
-
hello thank you for your reply can you tell me haw much you want for it and is it possible to check how much for the postage important for the 6 cilinder do you have any other parts and i need also the starter handle with brackets to start it manualy thank you very much mario
-
Hello all does any one has a self starter for sale or a hand starter any condision or any parts for the cs8 thx
-
hi pete i am mario from malta can you please let me know how much for the intake manifolds and do you have an exhaust manifold avadible please thx again regrads mario
-
Hi all this is the morris commercial cs8 we bought or what was left off it i started to do some work on it and i will send more photos ,thow we need a lott of parts i am loking forword to this restoration with meny qwestions to you guys if you dont mind. first i need to buy a copy of the work shop manual so if any one can sell me a copy please tell me. any one have any parts for it and wants to sell please tel me . best regards mario & chris
-
Hello to every one , i am Mario from Malta my gob is panel beating and spray painter me and my son Christofer are ww2 veachle collectors and we make all the restoration awerselves ,we have some veachils and british ww2 bikes , we just bought a MORRIS COMMERCIAL CS8 COMPRESSER the only left on the island what is left off it i would appriciate any help from morris ouners and any one has any extra parts for sale for the cs8 i be more then happy to buy , and i need a work shop manual origional or copy yhank you all for the great information you give on the hmvf ,
