Mike Sharpe
-
Posts
19 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Events
Articles
Store
Downloads
Posts posted by Mike Sharpe
-
-
Hello Mike, I've not forgotten. Just in the middle of a house move at the moment and trying to make some space to build the trailer bodies. I can send you what I have if you want, but it is only dimensions of the tub without the reinforcing struts, or the central chassis spar, so not sure it would be much use yet.
just wondered if you had any news yet?
-
If you are interested in selling this how much would you be looking for it. What town are you located, giving me post code as well. Thank you for sending me the photographs. very much appreciated.
-
Hello Mike, I've not forgotten. Just in the middle of a house move at the moment and trying to make some space to build the trailer bodies. I can send you what I have if you want, but it is only dimensions of the tub without the reinforcing struts, or the central chassis spar, so not sure it would be much use yet.
Thanks for reply will need dimensions etc on tub and frame so when u have it all that will be good. Just didn't want to keep bugging you. Good luck with the moving.
-
I have an issue of a strong, sometimes, violent vibration when I'm between 35-45 mph. If I then brake to a slow speed say 10mph my jeep comes out of it. Sometimes it shakes the jeep violently and then other times its no where near as bad. I have checked the drive shaft and front wheels to see if anything is lose. Any ideas. I appreciate any help on this. Thank You.
-
Want to let you know that I have solved the problem it was an earthing issue. I appreciate all of you that replied, thank you.
-
Be happy to hang on for the drawings, that's very kind of you. looking forward to seeing them. Very much appreciated.
Just wondering when you think you may have your drawings ready. No hurry just interested and don't want to bug you.
-
Again I appreciate all the help and enjoy this site very much. One further question is if it is bad grounding then why is it a lot worse when the engine has been driven for 20-30 mins and has got hot, to start it up again?
-
Yes it is a jeep 1942 Willys MB, 6 volts. I appreciate all the advice and will look into your suggestions. Thanks.
-
Once turning switch on. When pressing foot switch to turn on starter, the starter sound of turning over sounds sluggish and the hotter the engine the harder it seams to turn. I have put a starter heat insulator sheet between the starter motor and the engine wrapping the starter motor. I have a 6 volt system and it is a new starter motor, sounds as if it needs more amps if this helps my description of the problem. I look forward to any help on this, thank you.
-
I have a scanned copy of the April 1949 5460 Identification List for 10 CWT Trailers. It has some good detailed arrangement drawings. Shoot me your email through PM and I'll send you a copy.
Got scanned copy thank you very much, its going to be handy.
-
I've got two airborne wheels if these are of any use
Can you send photos and give me a price and location, thanks. ekim63s@yahoo.com
-
I have a scanned copy of the April 1949 5460 Identification List for 10 CWT Trailers. It has some good detailed arrangement drawings. Shoot me your email through PM and I'll send you a copy.
My email: ekim63s@yahoo.com. Thanks
-
I have a scanned copy of the April 1949 5460 Identification List for 10 CWT Trailers. It has some good detailed arrangement drawings. Shoot me your email through PM and I'll send you a copy.
Can you send me a copy, ekim63s@yahoo.com, thank you so much, very much appreciated. Thanks Mike Sharpe.
-
Hello Mike,
I am in the process of drawing up plans for a airborne trailer as I have 2 in pieces that need a new body and central spar. I am happy to share dimensions with you or even the drawings, if you can wait until I finish them.
I am also looking to get a quote for for getting the body panels pressed. Anyone out there had one made before who can give me an indication of the cost?
Tom M.
Be happy to hang on for the drawings, that's very kind of you. looking forward to seeing them. Very much appreciated.
-
Looking for manuals, equipment details, blue prints for this mortar. Also looking for a source for the purchase of a replica. looking forward to your replies. thank you.
-
Looking for blue prints, diagrams, technical manuals, measurements etc On WW2 British Airborne Trailer.
Also looking to purchase one or just the frame to restore. Looking forward to your replies.
-
Need drawings, blue prints measurements etc, Technical manual. Can anyone help?
Also does anyone know where there is one for sale? I'm based in the U.S. but will ship from Europe, Britain etc.
Looking forward to your replies, thank you.
-
Can anyone recommend a freight company that will ship from the Britain and Europe? They need to be reasonable and take care of items. Looking to ship WW2 military vehicles, trailers etc to be restored in the U.S. look forward to replies on contacts and advice, thank you for reading my post.
Need Plans, Diagram, Measurements to build a WWII British Airborne Trailer.
in Trailers, plant and equipment
Posted
I'm a Brit living in the States but trying to find plans, diagram, measurements to build a WWII British Airborne Trailer. Can any one help? I have already renovated an 1942 British Airborne MB Jeep. I look forward to your replys.