Jump to content

dog107

Members
  • Posts

    42
  • Joined

  • Last visited

Reputation

10 Good

About dog107

  • Birthday 01/01/1950

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Hi, I have had no luck with the Morris Eight path. Does the fact that the brakes are Cable or Rod activated throw any light on the likely origin. Has any one got any information on early British trailer hubs? cheers Michael
  2. Hi Catweazle, Thanks, I shall see what information I can find about the Morris 8. I noticed the amount of air present under the U blots. It's only obvious from that angle. The packing pieces were a result of the U Bolts being made to long! I shall radius the packing piece and then rebuild it. cheers michael
  3. Hi Guys, Thanks for your comments. I realised as soon fv1609 posted the sectional view that I should have taken the wheel off the hub before I photographed it. So here are some new pics. The brake drum and hub appear to be one piece. The brake actuator is rotary and has a toothed face so it can be mounted in any position. There is no obvious way to adjust the brakes. I'm reluctant to split the hubs as this will mean disturbing the bearings, something I don't want to do until I know how to set them up again. cheers michael
  4. I'm trying to identify the hubs my trailer runs on. The trailer is of undetermined manufacture but runs well behind my jeep. I have just rebuilt the trailer but I'm reluctant to split the hubs until I can get some maintenance information. The thread of the studs appears to be 1/2 inch BSF. With the pitch at about 2 7/8ths and the Diameter at 4". The hubs are braked. Any help will be gratefully received. cheers Michael
  5. Hi again I finally got back to the museum and the Chevy. I set it up with the new settings (thanks to Richard) and gave the starter a spin, nothing. I messed around a bit and took a plug out to check it, it was as dry as a bone. So of with the air filter and in the time honoured fashion I poured half a cup of petrol down the carb. Pushed the starter and it fired straight away. It ran for a bit and then stopped. I kept doing the petrol down the carb thing hoping that eventually it would start to draw fuel itself, but to no avail. So now that I have the timing sorted it has developed a fuel problem. At least I know what to do next. Thanks for all the help cheers michael
  6. Hi Thanks for the info. As my vehicle was registered sometime in 1944, I guess that it only needs it's painted on bonnet number. cheers michael
  7. Hi all, I'm looking for a scan/image of one of the vehicle permits (similar to the tax disc) that were carried by British military vehicles during the second world war. If you have such a thing or can point me in the right direction I'd be much obliged. cheers michael
  8. Hi you may find that brasso will help take of any surface oxidisation. As correctly stated by Mr 303 there is nothing much you can do about it. You can have it replaced at you local vehicle upholsterer. cheers
  9. hi meanwood ridge is on the steep escarpment on the south side of Meanwood Road. Although the wood is open to the public I only get to drive my jeep there as I'm part of the voluntary group that looks after it. It's a long time since I have played at Tong. Back in the good old days of the pennine land rover club. I can't afford or don't want to pay the £50 for the off road days. I guess it's these off road days that are making the course less damaging. You have a whole load of people with no experience and badly prepared or unsuitable vehicles trying to get round. So you minimise the risk of damage and recoveries. cheers michael
  10. Hi Just for information. This woodland, know as Woodhouse Ridge, was the first public park in Leeds. For about 60 years it was a very formal park, with gardeners and the like. The beech you can see forms the end tree of an avenue of beech trees running down to the beck. Since the late 40's the park has had less and less attention, basically being left to its own devices. There is a small group of us who do what we can to look after the woodland. cheers
  11. Hi guys That area of the woodland used to be a nice stand of Hawthorne and Oak. As part of the management plan we would clear all the other trees out. This will particularly help the Hawthorne and provide secure habitat for the smaller birds. See I told you it wasn't just me messing about in a jeep. If I remember the birch had been felled and then caught up in the trees next to it. This is a frequent occurrence in a dense woodland. I usually use the jeep for pull outs as, being a bit smaller than the Land Rovers you can get it amongst the trees. The woodland is in the middle of Leeds in gods own county.
  12. Hi this seems to have gone a bit of topic. The pulling down trees with the jeep could loosely be described as woodland management. Not just me messing about with my Jeep cheers
  13. I would rather break my Jeep rather than not use it. But I figure that it did about 45 years military service. If the combined efforts of the British and Norwegian army's failed to break it what chance have I. Anyway just running on to the end of a rope isn't going to do any damage, unless the tree falls on it! cheers
  14. Or here, I'll get the hang of this eventually. cheers
  15. Hi Some one suggested that the jeep looks like it gets used. Here is a little movie that shows that indeed it does http://s135.photobucket.com/albums/q135/dog107/?action=view&current=109_0911.flv
×
×
  • Create New...