alexfought

Hi, I’m trying to get hold of an RTS Trailmaster 355 Container Dolly set, or the US equivalent - an M720/M832/M840/M1022 Container Mobilizer Dolly

I’m aware batches were released by the MOD back in 2017 & 2019 & wondered whether anyone had, or knew of,  one for sale

I’ve attached a image for info…

Thanks

Hi All

I’ve a Bedford MK without an engine. Give the dearth of 330’s (they all seem to have been exported), I was wondering how difficult it would be to fit a 500 cu in non-turbo engine. I’m aware there was a version offered alongside the 330 engine, but can’t find any information about it.

Would anyone know if it would be a straight swap (I’m guessing not given it’s much bigger size) & whether it had to be mated to a 5 speed Turner box or could be fitted to the existing 4 speed box (again guessing the torque might be too high &/or the bell housing different).

Sorry for asking such naive questions, but I’m pretty new to this & would appreciate any advice or pointers to more info

Many thanks

Alex

Apologies to the purists, but is it possible to fit a GS body from an MK or MJ to.a Bedford RL?

Thanks

Hi John, many thanks for your efforts.

Happy to get just one as it’ll serve as a fabrication template...

all the best

Alex

Thanks both for your really helpful ideas!

Hi, looking for any interior door latches (both floor & ceiling), multipoint rod lock mechanisms & chrome figments for a CB300 type demountable workshop/comms body (see photo for examples). Unfortunately the box I’ve got has been stripped

Thanks

Alex

Hi John, I'd happily buy as many clamp brackets, J bolts & lifting shackles as you'd be prepared to sell!

I've 2 boxes to mount, neither of which unfortunately come with any fixings...

Cheers

Alex

Thanks!

Much appreciated!

Hi, that's the bracket design! Should come with a hook bolts, probably 250mm or so long...

Hi, does anyone have any J/hook bolts & clamp brackets for attaching a CB300 series workshop/comms box to a Bedford MJ/DAF T244 flatbed that they'd be prepared to sell?

I'm also searching for the lifting shackles/eyes that screw into the bottom frame of the box... & the purpose build spreader frame if anyone has one lying around they want to sell.

Thanks

Alex