Ausprey
-
Posts
71 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Events
Articles
Store
Downloads
Posts posted by Ausprey
-
-
This week i went to gozo to take some measurments and some templits to reproduce for my cs8
that are missing ,i would like to thank alan for letting me measure bits that i do not have ,
many brackets in engine bay and driver side ,and i would like to say big thanks to aii of those
help full people who helped me with parts and knolidge and measurments with out you i could
not continue the restoration .
-
does any one have 2 mails and 2 females for sale that are in the end off the stays that are from the bulk head
to angle iron in engine bay over engine i am posting some photos off them they are used also in hand brake stays
any help will be appriciatod thank you ass always .
these are 2 photos to show what i need thank you
-
-
some more parts are sand blasted ,etc prime and under coat . petrol tank brackets are ready to
be blasted and sprayed engine liners found from malta , today i went to gozo to take some more
measurments in engine bay breackts . hope to do some more work in christhmas holidays and
waiting for some parts we bought ,i would like to say thank you from my heart for those who
sold me some parts and more to others that send them even free.
-
Hi does any one no where I can buy engine
Mounting or if there is replicas or what
Type should I use as the rubber is not
Good thank you
-
Some more work during the week end till i find some parts and diagramms and measurments for the body to re manufacture i decided to start putting back togeter the transfer case , and gearbox ,
bought some new bearings and oil seals and made new gaskets , i welded by cast iron a piece off the transfer case that was broken ,does any one have any photes or diagramm of the mountings fromm the
tranfer case to the middle cross tube as it has the reduction for the compresser any help is appriciatod.
-
we know from the other identical package that it left sydney on a qf1 flight to heathrow and the australia post tracking labels were removed and substituted for another type. This made it impossible for the sender to track either of them.
hi all last week i continued some work on the morris,dismantell the petrol tanks and trays
they need to be new the straps are ready and radiator strips support ready ,not so much time
-
Hi i do not want you to go in that trouble but if i arrange for a currier to pick up
from your adress would you sell me some parts for cs8 after you receve the payment
best regards mario
-
lots of cs8 parts here but i need them myself
hi any luck for a self starter and an acilirater pedal,front springs brackets and shackels
front spring u bolds and center bolt plates even if they are with wear and thear at least
i will have a patern to do them thx
-
Hi all does any one no from where I can buy engine
Block liners also I need front spring hanger and brackets
That are bolted to shasis at the rear of the front springs
And the centre bold plates and I holds
Even with wear and tear as I do not have them even to copy thanks for your help mario
-
there's an opportunity. Your cs8 is a later c4 judging by the 4 cyl engine. Good luck. Jerry
it is a 1940 cs8 with 6 cilinder engine euroscreens
-
where you located as looks sunny?
i live in malta europe we are still with shorts and t shirt
-
-
I think the postage would be prohibitive ! Very expensive . I do have many CS8 parts but I am planning a restoration - one of these days LOL
Where are you ? Cannot see any country ? Mike
HELLO I LIVE IN MALTA EUROPE CAN I GIVE YOU MY E MAIL ADRESS freetime@go.net.mt
CAN YOU TELL ME HAW MUCH YOU WANT FOR THE STARTER AND IF YOU HAVE ANY EXTRA PARTS FOR SALE
I ALREADY BOUGHT SOME PARTS FOR THE CHEVROLRTT CANADA FROM AUSTRALIA THANK YOU YOUR
HELP WILL BE APPRICIATOD HOPE TO HEAR FROM YOU .
BEST REGARDS MARIO
-
I think the postage would be prohibitive ! Very expensive . I do have many CS8 parts but I am planning a restoration - one of these days LOL
Where are you ? Cannot see any country ? Mike
Hello can you send me your a mail
Adress I need parts or I have to send
The cs8 for scrap which I am trying
Not to with some help thank you very
Much .hope I here from you thx
-
hi
if you mean a starter motor, i have a few but i am residing in australia . Mike
hello thank you for your reply can you tell me haw much you want for it
and is it possible to check how much for the postage important for the 6 cilinder
do you have any other parts and i need also the starter handle with brackets to start
it manualy thank you very much mario
-
Hello all does any one has a self starter for sale or a hand starter
any condision or any parts for the cs8 thx
-
Random Bedford bits to clear
NoS AC fuel pump fully operational part No on block flange L4405 activating arm No 1524424.
£30.00 plus postage at cost SOLD
[ATTACH=CONFIG]119725[/ATTACH]
Hand brake lever I think this may be for a QL? £20.00 plus postage at cost
[ATTACH=CONFIG]119726[/ATTACH]
[ATTACH=CONFIG]119727[/ATTACH]
Used Inlet manifold no cracks £25.00 plus postage at cost SOLD
[ATTACH=CONFIG]119728[/ATTACH]
[ATTACH=CONFIG]119729[/ATTACH]
[ATTACH=CONFIG]119730[/ATTACH]
Will sell separately or take an offer for all three items
Thanks Pete
hi pete i am mario from malta can you please let me know how much for the intake manifolds and do you have an exhaust manifold avadible please thx again regrads mario
-
Welcome. If possible any pictures.
Hi all this is the morris commercial cs8 we bought or what was left off it
i started to do some work on it and i will send more photos ,thow we
need a lott of parts i am loking forword to this restoration with meny
qwestions to you guys if you dont mind. first i need to buy a copy of
the work shop manual so if any one can sell me a copy please tell me.
any one have any parts for it and wants to sell please tel me .
best regards mario & chris
-
Hello to every one , i am Mario from Malta my gob is panel beating and spray painter
me and my son Christofer are ww2 veachle collectors and we make all the restoration
awerselves ,we have some veachils and british ww2 bikes , we just bought a MORRIS
COMMERCIAL CS8 COMPRESSER the only left on the island what is left off it i would appriciate
any help from morris ouners and any one has any extra parts for sale for the cs8 i be more then
happy to buy , and i need a work shop manual origional or copy yhank you all for the great
information you give on the hmvf
,
morris commercial cs8
in Blogs of MV restorations
Posted
After sorting all the templets and measurments i started to do some brackets and missing parts.
Next week i will receve some parts for the cs8 and continue reproducing. Any comments goodor bad are welcome
i can learn from you and i will be pleased thank you all for your knoledge