2e0prp

hi , i am on the look for spares for a Onan w3m generator , cylinder head , and gasket  and rad cap , and any other parts that may be available ,  any help on these would gladly  be appreciated,  best  regards  Pete 

ok thanks Rob

hi , where in Northamptonshire did you see it please  , regards  Peter 

hi , can give it a go  to see if it fits , any cable would be a help please ,cost plus p/p  thanks Richard

hi Richard , thanks for you response, bin checking it out  i think it`s a No45 power supply i do not know who makes it, the input on the receiver looks like a fine thread , i will get the out side diameter and the thread  pitch in the next few days , many thanks for your help , Pete     

looking for a power supply  and leads to run a military  R 216  thank you 

hi , i`m sure it`s call checker plate , i have used it on walkways in engineering . hope this helps you 

hello back again , could anyone give the info of the brass plate that is or was located on the passenger side  of the footwell in the  engine bay  as mine is missing , i understand it gave the engine number and chassis number but not to sure as i was give the information by some person,  a photo of one would great  that   would give me the size and what it looks like , thank you   Pete        ps , and where would obtain one , Pete

thank you for your for all the information over the last few days , will give them call sometime tomorrow  Richard  , best regards  peter  

hello , has anyone found anyone that can supply this Khaki Green g3 paint , looking for about two to three  lts ,  to paint my OYD , thank you  Peter

thank you Richard , it is very difficult to really say what green it is but that was the nearest i could get to it , under that it was bear metal, the other that has thrown me it has only the large speedo gauge  and  a smaller round  amp meter  , oil pressure, and water temp gauge  with the round switch panel, where i have seen in most of oyd   two large gauges  one being speedo and the other containing  oil pressure and amp meter , i wonder what you views are on this , pete 

 hi , i wonder it someone could help , would like know the colour paint used on a 1939 bedford oyd , removing some paint today i found  a colour of paint under the nato green like a  all most deep bronze green ,  what the colour would have been used on  B E F  at Dunkirk or just after , thank you in advance,  Peter  

i wonder if anyone could help , i`m looking for amy information of pictures  of the inside of a fuel laboratory Bedford oy , that was used in ww2  in the desert  with the 8th  army , i have photos of the outside  which was taken at the time by my late father in law  who drove it , would like to recreate one and also use the  number  on the drives door  in his memory  , thank you 

hi , folks , looking for very good 10.5 x 16 to fit an Bedford oy ,can any one help , thank you  Peter

hi , is the wheel and tyre still up for grabs , thanks  Pete

hi, looking  11 x 20 , and if you have any 10.5 x 16 `s , thanks  Pete 

hi , i wonder if any could help , i`m trying to locate a pair of good  feq dial`s for a NZ-1 Mk2   receiver/transmitter , any one got some for sale please contact me ,, many thanks  Pete

hello , i wonder if anyone can help , i have a vehicle ID plate with the reg of  01 YX 96  and a chassis no of 28059 stamped on it,  also it has a repair do on it in 12/53  ,i`m just wondering what vehicle  it may have came off please , thank you  Pete 

hi , has the body got anything inside of it , and where abouts is the body located please , thank you 

size please 

well thank s all for the info , i would like to buy private , there was a matchless on a site that i was going to have but a well known trader came along , which jarred me off a bit , something will come up 1`m  sure 

well thanks all i`ll give it a try and see what happens, pete

looking to obtain a ww2 matchless, will pay the right price for the right bike ,restored or not but must be running , and not to far away in the uk 

looking to obtain a ww2 matchless, will pay the right price for the right bike ,restored or not but must be running , 

hi , i wonder if you still have these carbs , regards Pete