Jump to content

gwrightoy

Members
 View Profile  See their activity

  • Posts

    188

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Everything posted by gwrightoy

  1. gwrightoy
    Yes they do. Thanks
  2. gwrightoy
    OK Richard thanks again for your help
  3. gwrightoy
    OK Richard thanks. Do you recognise the square headed bolts I have posted up?
  4. gwrightoy
    Does anyone recognise these springs. Thanks Graeme
  5. gwrightoy
    Does anyone recognise these square headed bolts. I/2", x 20tpi unf. Hole for split pin in other end. Thanks Graeme
  6. gwrightoy
    Not sure what these are for but I have been told that they are not ww2 jeep. Galvanised underneath green paint. One is slightly different from the other. Possibly marked 1 and 1 1. £20 + post Any questions 07765086115
  7. gwrightoy
    No Sorry no more available.
  8. gwrightoy
    I thought so Richard and thanks for the reply but I have been told no. They are too thin and mounting holes not staggered.
  9. gwrightoy
    Can someone tell me what these grab handles may be off please. They are each slightly different. Marked possibly 1 and 2.. Thanks Graeme
  10. gwrightoy
    New Still in box. Austin K9 crankshaft. I can get it delivered next weekend. £120. Any questions 07765086115.
  11. gwrightoy
    Sold
  12. gwrightoy
    Not sure exactly what this clamp bolt fits but it could be Austin k2 for the spare wheel or sand track attachment for ferret. Not sure. 5/8 11tpi. Condition is good. £15+post. Any questions 07765086115.
  13. gwrightoy
    Yes, as Roy walker used to say its good but it's not right😅
  14. gwrightoy
    Sold
  15. gwrightoy
    I have been told that this is possibly the spare wheel Clamp bolt for the Austin tilly or Austin k2. You will have to decide for yourself. Condition is good. Threads are 5/8 11 tpi. £18 +post.
  16. gwrightoy
    Not sure exactly about this but could it be for holding a sand track on maybe a ferret? Or possibly Austin tilly spare wheel Clamp bolt. It's 5/8 x 11tpi so whitworth or unc. Thanks Graeme
  17. gwrightoy
    I am not sure exactly what this clamp nut fits but it could be for the Loyd carrier spare wheel or For clamping a sand track on to various military vehicles. Maybe Scammell related. It is 3/4 10 tpi so probably whitworth. Fitted with big brass washer. Small marking beside threads. WH1 I think. Condition is good. Any questions 07765086115. £20 +post.
  18. gwrightoy
    Can anyone identify these nuts please. Could it be a spare wheel Clamp nut or sand track Clamp nut. 3/4 10 tpi so probably whit thread. Fitted with brass washers. Thanks Graeme
  19. gwrightoy
    Can anyone tell me what these where for. I suspect they might be for a crane jib pin nut or for clamping a sand ramp or a spare wheel on. 3/4 10 tpi so probably whit or maybe unc. I don't know how to tell the difference. Fitted with big brass washers. Thanks Graeme
  20. gwrightoy
    Sold
  21. gwrightoy
    Not sure but I think it's the differential that you would need to change. OB bus diff would be good.
  22. gwrightoy
    I fitted an overdrive from. Andy Usher. It helped on the OY which I think had a 7.4 :1 differential ratio. Message me if you want anymore info. Regards Graeme
  23. gwrightoy
    Suitable for the MW OX and OY. New old stock. £15 +post. 07765086115
  24. gwrightoy
    Last one. New old stock K9. Front Spring Bracket Rear. £20.+£3.20 post. Thanks Graeme 07765086115
  25. gwrightoy
    Can anyone identify these new well greased up parts. Some kind of flange with threaded insides. British related I presume. Thanks Graeme
×
×
  • Create New...