-
Posts
22 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Events
Articles
Store
Downloads
Posts posted by windsorguyone
-
-
Hello,
Trying to track down a missing engine stay for my 1944 Triumph 3hw project... decided I may need to make one myself.
Any chance someone can take a close up and clear picture of the engine stay so I know what I am trying to replicate? Below is a fuzzy picture of the stay i am looking for.
Appreciate the help!
Ian
-
-
Ok... great. So it does in fact need a gasket. That would solve the issues.
Thanks again!
-
Can anyone confirm the length of the spacer that goes inside the primary chain case? (see pic)
For some reason, everything looks right but when I fit my chain case cover over top there is about a 1/8 gap between the cases... when I take the spacer out to see if the chain case cover fits it is a perfectly flush. I am thinking this spacer is about 1/8" too long... or there is some sort of 1/8" cork gasket that goes between the chain case cover and the chain case.
Any advice would be appreciated.
-
Awesome... thanks Ron! I found the horn and looks like I will be making the steady.
Appreciate the help.
-
Hi All,
Nearing the end of my '44 Triumph 3HW project and had a question regarding the toolbox.
Below is what I took apart when I first disassembled the bike... is this right? Does anyone have a picture of what the fastener assembly should look like? My gut tells me this is not correct.
As always, any help appreciated.
-
Hi all,
Nearing the end of my '44 Triumph 3HW project and was wondering if anyone had advice on where i could find:
- Front frame torque stay (I think). I notice in pictures most bikes have some sort of stud between the top/front of the engine to the down tube... but I don't see this listed in the parts book. Any advice here would be appreciated
- Horn
- Inflator (to be mounted on chain guard)
Appreciate any help!!!!
Ian
-
Thanks Ron!
-
Hi All,
Starting to think i have the wrong size rear chain on my '44 3HW project. Can anyone confirm the size of the rear chain for me?
I currently have: 530 (5/8" pin-to-pin x 3/8" inner clearance) with 90 links.
Thanks!
Ian
-
Hey Ron,
Great bike... and thanks again for putting in the leg work on finding the C number.
And yes, you are correct, I am located in southern California. Although I am Canadian and just hear for the year to warm up.
Ian
-
Hi Ron,
Great information... thank you. Was it standard to have the Triumph logo on both side of the tank... as well as the 'C" number?
My frame number is: 50936
Thanks again!
Ian
-
Restoring a '44 Triumph 3HW and had a question regarding the gas tank... more specifically the military markings and the art work.
I can't seem to track down where my bike was placed so will most likely just make up the number markings... but was curious if there were specific placements on the gas tank (or anywhere else on the bike) that the markings and art work were supposed to go. IE. only on left side or tank, both sides, fenders, etc.
Anyone have any idea?
Ian
-
Thank you! Ended up going with the Dunlop K70's.
-
Anyone have any good suggestions for tyres for my '44 Triumph 3HW project? Would like to keep the tread pattern similar to original tyres issued if I can.
Thanks!
Ian
-
Hey Ron,
I am still struggling to find front brake shoes for my Triumph 3hw project. Do you have any other suppliers you think may have them?
Ian
-
Beauty... thank you!
-
-
Ron,
You are a life saver.... thank you!
Ian
-
Hi all,
Restoring a '44 Triumph 3hw and was having trouble tracking down brake shoes for front and back. I have read that they are interchangeable with shoes from 60's era triumphs... does anyone know if:
1) is this true?
2) what shoes I can replace these with for front and rear?
Any help would be appreciated.
Thanks!
Ian
-
Thank you Ron!
So is this bike considered a '44 or '45?
Also, is there any documentation to know where this bike would have been sent / unit it belonged to?
Thanks again,
-
Hi All,
First post about my new project... only thing I am not 100% sure about is what colour it is supposed to be; I would like to bring it back to original.
I understand it went from Khaki Green... to Service Brown... to Olive Drab. Just not sure when those changes happened and how to find out what this one was.
Bike numbers are:
Engine: TL 50936
Frame: 3Hw 60936
Under Seat: TEC 743
Any help pointing me in the right direction would be awesome!
Thanks,
Triumph 3HW Engine Stay
in Motorcycles
Posted
Thanks Ron... that is exactly what I needed to see.
Ian