MikeNZ

Does anyone have any idea of the value or a WW2 aero tug - Thinking Clarktor 6 etc. 

Estimates are fine - I am trying to understand the market generally

Any help to identify would be appreciated

Thanks All for your replies.

After examining your suggestion and isolating, The fault has been traced to a slightly warped wheel rim.

Hi All

At between 35 -45mph my 1942 CCKW gets a bad case of the shakes - Violent shuddering side to side. Hitting a expansion joint produces such severe motions that it is difficult to hold the wheel. A side to side motion is the best way i can describe it.

Thus Far:

New Draglink

Balance & Alignment.

It only occures at 35+ - Below this & the trucks handles correctly and drives true & straight,

Any Ideas?

Hi All

Does anyone have a picture of their fuel filter - hose - fuel pump as it should be. Mine is hacked will all sorts of fittings and fixtures to make the DIY line fit. It would be good to see a picture to see what is original and what is not.

I have a NOS fuel hose with some light rust within the fittings at both ends & is dirty inside. What are the best ways of cleaning it out?

Thanks for your help!

Mike

Fanatastic, Thats it. Thanks very much for that

It has 19207-11599015 stamped on the bottom and "Made in Canada" stamped on the top rim

I have had this fuel pump handed to me, supposedly of Jeep origin. It is stamped "Made in Canada"

Any info very welcomed.

Thanks in advance.

Mike

Hello from NZ