Jump to content

Plushy

Members
  • Posts

    11
  • Joined

  • Last visited

Posts posted by Plushy

  1. Thanks for the Tip Diana and Jackie , ended up doing a similar method using a vice a length of steel tube and some high tensile wire . Have managed to get the clutch assembled now and ready to go back onto the gearbox. Ill try and get some photos tomorrow to post up . 

  2. Thanks for the Welcome John1950 and Teletech . 

    Teletech at this stage it will be Green paint and standard belgian markings . In the future it may end up with UN makings and paint . Apart from a healthy dose of water in the gearbox compartment the rest of the hull is in excellent condition . All the Torsion bars except for one are in servicable condition . The motor mounts are in good condition too which is nice . 

     

    So far the Scimitar has been moved into one of the Sheds and Dismantled . Gearbox and final drives removed and new seals installed as well as new bearings in the Right hand drive as they were stuffed . 

    Gearbox has been cleaned and repainted along with calipers and other parts . 

    Clutch has been stripped and rebuilt just waiting on the Garter springs to arrive so it can be finished and reinstalled . 

     

     

     

    348926651_1291245327943185_2834186649161869404_n.jpg

    348723560_635405428629280_1287627213587729045_n.jpg

    348324739_793135918767706_4385691093792147482_n.jpg

    345199179_779213573576690_6929414642654319957_n.jpg

    345165085_772139951107074_2031079105393633688_n.jpg

    345063188_3035668166740222_8199284737707438456_n.jpg

    • Like 1
  3. Hi All , 

                 Thought i had better better start a Restoration Blog here so that i have the story of 65216 recorded somewhere and so you guys can see my mistakes and the problems i find . 

    Some of you will have probably seen my posts on the CVRT Appreciation group on Facebook already so hopefully  i wont bore you reposting photos here . 

     

    65216 is an Ex-Belgian Scimitar which from what i have been able to find out went to the UK after disposal , it was then partially dismantled before being sold to a fellow in Western Australia . From there it passed through a couple of owners until i purchased it from a Gent in Queensland . 

    The photos show 65216 as it was when i purchased it  and its arrival to my Farm in Victoria  in a 20ft container . 

    A bit of background about me , I am a Farmer near Ballarat Victoria and also own a Centurion ARV 169114 in running condition  as well as a Lp2a Carrier  project that will be started once the Scimitar is finished . 

    James .

     

    IMG_1246.JPG

    IMG_1256.JPG

    IMG_1261.JPG

    IMG_1266 - Copy.JPG

    IMG_1290.JPG

    IMG_1293.JPG

    • Like 2
  4. Hi Don ,

    it would be good to meet you and have a chin wag . Dont know if its any help for the Diamond T resto ,probably not seeing as your nearly done but i have a Maintenance manual for the 981 . you probably have one but if you dont sing out and i will see if i can get this one copied for you . :D

    I have been through Willaura quite few times my father owns a few thousand acres up at Laharum and i spend a fair bit of time driving round the western district looking for old military vehicles and trucks .

     

    cheers James

  5. Hello to everyone ,

    My names James and i live in a small town called Miners rest which is in Victoria,Australia . I am in the middle of a restoration of a Ford F15A CMP or Blitz as we call them down here and i am hoping to recover a Lloyd Carrier and a Matilda in the next few months .

    The blitz is a lot further ahead than the photos , i keep forgetting to take new progress photos :embarrassed:

    Blitz

    Chassis006.jpg

    Chassis007.jpg

     

    Matilda

    Bits028.jpg

     

    Lloyd

    loyd_lf_3-1.jpg

    loyd_front2-1.jpg

     

     

    cheers James

×
×
  • Create New...